Showing 3853–3864 of 4062 results
Shop
Waveshare 7inch Capacitive Touch Screen LCD (C) with Bicolor Case, 1024×600, HDMI, IPS, Low Power
- Pixel count: 1024 x 600
- HDMI display port
- Type of Touch: Capacitive
- Five touch points
- 7-inch IPS screen with 1024 x 600 hardware resolution.
- five capacitive touch points for control.
- It supports Raspbian, Ubuntu, Kali, Retropie, and Windows 10 IoT using Raspberry Pi; no drivers need to be installed.
Waveshare 7inch Capacitive Touch Screen LCD (C), 1024×600, HDMI
- 7-inch IPS screen with a hardware resolution of 1024 × 600.
- 5-points capacitive touch control.
- When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie
- Use as a computer monitor, it supports Windows 11 / 10 / 8.1 / 8 / 7, five-point touch, no need to install any drivers.
- Support backlight control, more power saving.
Waveshare A7600C1 LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
- LTE Cat-1 HAT for Raspberry Pi enabling 4G and 2G communication.
- Supports TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL protocols.
- Features dial-up, telephone call, SMS capabilities for versatile communication.
- LTE-FDD: B1/B3/B5/B8
- LTE-TDD: B34/B38/B39/B40/B41
- 2G:GSM/GPRS/EDGE: 900/1800 MHz
- SMS:Supported types: MT, MO, CB, Text, PDU
Waveshare Adapter Board for Arduino and Raspberry Pi
- Onboard CP2102 USB TO UART converter
- TLC1543: AD converter
- PCF8563 : RTC
- 32.768KHz crystal: for RTC
- RTC battery holder: for the CR1220 button battery
Waveshare Aluminum Heatsink For Raspberry Pi 5, With Thermal Pads And Spring-Loaded Push Pins
- Model: Waveshare Aluminum Heatsink For Raspberry Pi 5, With Thermal Pads And Spring-Loaded Push Pins
- Efficient Heat Dissipation
- Aluminum ConstructionThermal Pads
- temperature management and performance optimization
Waveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
- Power Input: 5V
- CM4 Socket: suitable for all variants of Compute Module 4
- Connector: M.2 M KEY slot, for connecting communication module or NVME SSD; Arduino compatible GPIO header
- USB: USB 2.0 Type A x 1
- Camera: MIPI CSI-2 × 1 (15pin 1.0mm FPC connector)
Waveshare AS7341 Spectral Color Sensor, Visible Spectrum Sensor, Multi Channels, High Precision, I2C Bus
- Chip: AS7341
- Interface: I2C
- Supply voltage: 3.3 V or 5 V
- Dimensions: 30 x 23 mm
- Mounting hole: 2 mm FOR BULK B2B ENQUIRIES MAIL US @ibots.in
Waveshare AW-CB375NF Dual-Band Wireless NIC, 2.4G/5GHz Dual-Band WiFi 5, RTL8822CE-CG Core, Bluetooth 5.0, Supports BLE
- allows for dual-band 2.4G/5GHz operation, with a maximum speed of 300 Mbps in the 2.4G band and 867 Mbps in the 5GHz band.
- Adopts NGFF (M.2 A/E Key) interface
- supports Bluetooth 5.0 standard; compatible with Bluetooth 2.1+EDR
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Waveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long range communication through SPI
- Product Waveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long-range communication through SPI
- Operating Voltage 3.3V~5V
- CAN Controller MCP2515
- CAN Transceiver SIT65HVD230DR
- Communication BUS SPI
Waveshare Cat-1/GNSS HAT for Raspberry Pi, Based On SIM7670G module, Global Multi-band LTE 4G Cat-1 support, GNSS positioning, 3x USB 2.0 extended ports
- Product: Cat-1/GNSS HAT
- Power supply: 5V
- Logic level: 3.3V
- Data transmission: ≤5Mbps (UL) / ≤10Mbps (DL)
- GNSS: GPS, GLONASS, Galileo, BeiDou
Waveshare Cat-1/GSM/GPRS/GNSS HAT for Raspberry Pi, Based On A7670E module, LTE
- LTE Cat-1: LTE-FDD: B1, B3, B5, B7, B8, B20
- 2G :GSM/GPRS/EDGE: 900/1800 MHz
- GNSS :GPS, BeiDou, GLONASS
- Power supply: 5V (via USB port or 5V pin header), 3.7 ~ 4.2V (via VBAT pin-header, supports 3.7V Li-ion battery power input)
- 4.2V (via VBAT pin-header, supports 3.7V Li-ion battery power input)
- Operating voltage: 3.3V.
Waveshare CM4 To Pi 4B Adapter for Raspberry Pi Alternative Solution for Raspberry Pi 4B, CM4 optional
- Onboard 4-ch USB 3.0 ports, compatible with USB 2.0 / 1.1 transmission
- Onboard RJ45 Gigabit Ethernet port, 10 / 100 / 1000 M adaptive
- Onboard PoE header, for connecting PoE HATs
- DSI interface is DSI1
Load more products
Loading...