Showing 3865–3876 of 4062 results
Shop
Waveshare Compute Module IO Board Plus, for Raspberry Pi CM3 / CM3L / CM3+ / CM3+L
- Voltage regulator: 3.3V / 2.5V / 1.8V
- ACT indicator: indicating the Micro SD card status
- TLC1543: AD converter
- DAC8552: 16-bit DAC, 2-ch
- Compute Module interface: for connecting Compute Module (CM3 / CM3L / CM3+ / CM3+L)
- Compute Module GPIO header: breakout all the Compute Module pins
Waveshare DC Motor Driver Module for Raspberry Pi Pico Driving up to 4x DC Motors
- Operating voltage: 6~12V (VIN terminals)
- Logic level: 3.3V
- PWM driver: PCA9685
- Motor driver: TB6612FNG
- Control interface: I2C
- Dimensions: 65 x 56mm
Waveshare Dedicated 3007 Cooling Fan for Raspberry Pi Compute Module 4 CM4
- Product Waveshare Dedicated 3007 Cooling Fan for Raspberry Pi Compute Module 4 CM4, Low Noise, 5V
- Rated Power 1W (5V, 0.2±0.02A) 1.62W (12V, 0.135±0.02A)
- Rated Speed 5000±10%RPM 8000±10%RPM
- General Low-profile, PWM speed adjustment
Waveshare Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4 CM4, with Antenna Notch
- Name: Waveshare
- Item: Heatsink made of aluminium
- Fit for: Raspberry Pi
Waveshare Dual ETH Mini-Computer For Raspberry Pi Compute Module 4 (Without Power Adapter)
- Model: Waveshare Dual ETH Mini-Computer
- Power input: 7-36V
- USB: USB 2.0 Type A
- Connector: Isolated RS485 , Power screw terminal
- Video: HDMI port , supports 4K 30fps output
- Networking: Gigabit Ethernet RJ45 connector,
Waveshare Dual ETH Quad RS485 Base Board (B) for Raspberry Pi Compute Module 4
- Power Input: 7-36V
- CM4 Socket: suitable for all variants of Compute Module 4
- Networking: Gigabit Ethernet RJ45 connector, 100M Ethernet RJ45 connector
- USB: USB 2.0 Type A × 2
- Camera: MIPI CSI-2 port × 2 (15pin 1.0mm FPC connector)
- Video: HDMI port × 1, supports 4K 30fps output
Waveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
- Region / Provider EMEA / APAC (except Japan and CMCC) / Brazil
- Module dimensions 42.0 × 30.0 × 2.3 (mm)
- Operating temperature -30°C ~ +70°C
- LTE-FDD B1, B3, B5, B7, B8, B20, B28, B32 (receive only for B32)
- LTE-TDD B38, B40, B41
- B20+B32 (B32 is used for aux component carrier only), B38+B38, B40+B40, B41+B41
Waveshare ESP32-S3 Microcontroller, 2.4 GHz Wi-Fi Development Board, dual-core processor with frequency up to 240 MHz
- Adopts ESP32-S3R2 as the main chip.
- Comes with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz.
- Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory.
- Type-C connector, easier to use.
Waveshare Ethernet / USB HUB HAT (B) for Raspberry Pi Series, 1x RJ45, 3x USB 2.0
- 3x extended USB ports, compatible with USB 2.0 / 1.1
- Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation
- Pogo pin design, for directly connecting with Raspberry Pi Zero/Zero W/Zero WH
Waveshare Extended 4-Ch PCIe Gen 2 ×1 Expander Stable Performance Driver-Free
- Extending 1-ch PCIe to 4-ch PCIe Gen 2 × 1 sockets, PCIe Gen 1 × 1 compatible
- Flexible power supply options: powered from either PCIe 12V, OR from 12V DC header
- Adopts ASM1184 controller, driver-free, plug and play
Waveshare FT232 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector
- FT232RL
- 3 power mode original
- Three LEDs: POWER, RXD, and TXD
- Supports Windows 7/8/8.1/10, Linux, Android, WinCE, and Mac
Waveshare FT232RL USB TO RS232/485/TTL Interface Converter, Industrial Isolation
- Type of product: optically isolated industrial converter
- 300-921600 bps is the baudrate.
- USB host port
- Port of the device: RS485/RS232/TTL
- Computer operating system: Windows 8.1, 8/Windows 7, XP
Load more products
Loading...