Showing 3889–3900 of 4062 results
Shop
Waveshare Industrial-grade Isolated 8-ch RS485 Hub, Rail-mount Support, Wide Baud Rate Range
- Economical
- Physical Interface: Screw Terminal RS485
- Self-adaptive Baudrate: 300–460800 bps
- Supported Nodes: Up to 32 nodes can be supported by each RS485 port.
- 1200 metres of communication distance (9600 bps); the closer the distance, the higher the rate.
Waveshare Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections
- Operating Voltage 3.3V
- Expanded Interface 2-Ch RS485 + 1-Ch CAN
- Communication Interface SPI
- CAN Controller MCP2515
Waveshare Isolated RS485 RS232 Expansion HAT for Raspberry Pi, SPI Control
- Serial port expansion chip: SC16IS752
- OPERATING VOLTAGE: 5V
- RS485 transceiver: SP3485
- Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi series motherboards
- Using SC16IS752 and SP3485, SP3232 multi-chip combination scheme, can realize SPI to RS485, RS232, the communication rate is up to 921600bps
- RS485 transceiver: SP3485
- RS232 transceiver: SP3232
- Communication Interface: SPI
- DATA RATE: Up to 921600bps
Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS
- Power supply voltage: 5V / 3.3V
- Operating current: 13mA
- Protocols: NMEA 0183, PMTK
- GNSS antenna connector
- CAT24C32: EEPROM
- RT9193-33: power manager
- Battery holder: supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
Waveshare M.2 NGFF SATA to 5-Ch SATA3 Expander, JMB575 control chip
- Supported Hard Drives: SATA-compatible HDDs and Solid State Drives.
- Interface for transfer: M.2 B-key, SATA female port × 5. 6Gbps is the transfer speed for SATA3 male port x 1.
- System software: Linux / Windows
- Measurements: 80.0 x 22.0 mm
Waveshare Mini Base Board (C) Designed for Raspberry Pi Compute Module 4
- Product Waveshare Mini Base Board (C) Designed for Raspberry Pi Compute Module 4
- Networking Gigabit Ethernet RJ45 connector
- Connector M.2 M KEY, supports communication modules or NVME Solid State Drives, Raspberry Pi 40PIN GPIO header
- USB 2.0 Type A × 2
- Display LCD port (40pin 0.5mm FPC connector)
Waveshare Mini Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4
- Brand: Waveshare
- Networking: Dual Gigabit Ethernet RJ45 connector
- USB: USB 2.0 Port
- PIN Header: Raspberry Pi 40PIN GPIO header
- Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
Waveshare Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
- Power Input: 5V
- Connector: Raspberry Pi 40PIN GPIO interface × 1
- USB: USB 2.0 Type A interface × 1
- Camera: MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)
- Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4
- Power Input: 5V
- Connector: Raspberry Pi 40PIN GPIO interface × 1
- USB: USB 2.0 Type A interface × 1
- Camera: MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)
- Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
Waveshare Nano Base Board (C) for Raspberry Pi Compute Module 4
- Video Mini HDMI port × 1, supports 4K 30fps output
- Storage TF card socket for Compute Module 4 Lite (without eMMC) variants
- Power Input 5V
Waveshare NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Globally Applicable
- Model: Waveshare NB-IoT / Cat-M(eMTC) / GNSS
- Power supply voltage: 5V
- Logic level: 5V / 3.3V
- Overall current : 39mA
- Baudrate: 300-3686400 bps
Waveshare PCIe To 2-ch M.2 Adapter for Raspberry Pi 5, Compatible with 2230/2242 Size NVMe Solid State Drive, Raspberry Pi 5 M.2 HAT
- Interface: PCI-E×1 Gen2
- Compatibility: Raspberry Pi 5B
- Supported SSD Sizes: 2230/2242
- Indicators: Power (PWR), Activity (ACT)
- Design: HAT+ with onboard EEPROM chip
- Power Monitoring: Onboard chip for real-time status
- NVMe Boot: Not supported
Load more products
Loading...