Showing 3925–3936 of 4062 results
Shop
Waveshare RS232 RS485 to RJ45 Ethernet Serial Server, RS232 And RS485 Dual Channels Independent Operation, Dual Ethernet Ports, common netowrk port
- Product Type: Modbus Gateway, MQTT Gateway, Serial Server
- 300 to 115200 bps is the baudrate.
- Temperature range for operation: -40 to 85
- Range of humidity: 5 to 95 percent relative humidity
Waveshare RS232 To RS485/422 Active Digital isolated Converter, Onboard Original SP3232EEN and SP485EEN Chips, Options for RS232 DB9 Male port
- Model: Waveshare RS232 To RS485/422 Active Digital isolated Converter, Onboard Original SP3232EEN and SP485EEN Chips, Options for RS232 DB9 Male port.
- Stable transmission at the rate of 300~921600bps.
- Onboard 15KV ESD isolation protection and 600W lightning proof & anti-surge protection.
- Onboard power supply screw terminal, allows 5V~36V DC wide range input.
- Provides seamless communication between RS232 and RS485/422 devices.
Waveshare RS485 CAN HAT for Raspberry Pi
- Voltage required for operation: 3.3V
- CAN device: MCP2515
- SN65HVD230 CAN transceiver; SP3485 485 transceiver
- Size of mounting hole: 3.0 mm
Waveshare RTC WatchDog HAT for Raspberry Pi, Auto Reset, High Precision RTC
- MAX705 monitoring circuit with auto-reset function
- Incorporates DS3231SN high precision RTC chip, with backup battery holder
- Reset pin selection for switching watchdog
Waveshare Sense HAT (B) for Raspberry Pi, Multi Powerful Sensors
- Operating voltage: 3.3V
- Communication interface: I2C
- Logic level: 3.3V
- LSF0204PWR: 4-ch voltage level translator
- RT9193-18: 1.8V linear regulator
- RT9193-33: 3.3V linear regulator
Waveshare Sense HAT (C) for Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors
- Product: Waveshare Sense HAT (C) for Raspberry Pi, Onboard Multi Powerful Sensors
- Magnetometer Features: Resolution: 16-bit
- Operating Voltage (VDC): 3.3
- Accelerometer Features: Resolution: 16-bit
- Gyrometer Features: Resolution: 16-bit
Waveshare Serial Bus Servo Driver HAT, Integrates ESP32 and Servo Control Circuit, Suitable for ST / RSBL Series Serial Bus Servos
- Controller: ESP32-WROOM-32
- Power Supply Port: XT60 connector, 5.5×2.5 mm DC jack
- Power Supply: 9~25V (the input voltage and the servo voltage must be matched)
- Communication Interface: UART, USB Type-C port × 2
- Wireless Communication: 2.4G WiFi
- Mounting Hole Diameter: 3 mm
- Mounting Hole Spacing: 58×49 mm
- PCB Size: 65×57 mm
Waveshare Serial Expansion HAT for Raspberry Pi
- Operating voltage: 3.3V
- Expansion chip: SC16IS752
- Control interface: I2C
- Mounting hole size: 3.0mm
- 2-ch UART and 8 programmable GPIO through I2C
Waveshare Servo Driver HAT (B) for Raspberry Pi, 16-Channel, 12-bit, I2C
- Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal)
- Servo voltage: 5V
- Logic voltage: 3.3V
- Driver: PCA9685
Waveshare SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support
- Model: Waveshare SIM7600G-H 4G HAT
- Supports: Raspberry Pi, LTE Cat-4 4G / 3G / 2G
- Cold starts: 148 dBm
- Power supply: 5V
- Receiver type: 16-channel C/A Code
Waveshare SIM7600G-H 4G HAT For Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support
- LTE Cat-4, 3G, 2G Frequency Bands.
- LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink).
- 3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink).
- MP2128DT, MP1482 power chip
- NAU8810 audio decoder
- TXS0108EPWR voltage translator
- Satellite Bands: GPS/Beidou/GLONASS.
- Supports echo cancellation, noise reduction.
Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band
- LTE Cat-4: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD: B34, B38, B39, B40, B41
- 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19
- 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
- GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
- USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication
Load more products
Loading...