Showing 3973–3984 of 4062 results
Shop
WIZnet Ethernet HAT
- Product: WIZnet Ethernet HAT
- Includes W5100S
- Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
- Supports 4 Independent Hardware SOCKETs simultaneously
WIZnet W5100S-EVB-Pico
- RP2040 microcontroller with 2MByte Flash
- Dual-core cortex M0+ at up to 133MHz
- 264kByte multi-bank high-performance SRAM
- 30 multi-function General Purpose IO (4 can be used for ADC)
- 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)
- 12-bit 500ksps Analogue to Digital Converter (ADC)
WIZnet W5500
- Product: WIZnet W5500
- Enables high-speed serial peripheral interface (SPI MODE 0–3)
- Supports wake on LAN via UDP.
- 32K bytes of internal memory used for Tx/Rx buffers
WIZnet WizFi360-EVB-Pico
- RP2040 microcontroller with 2MByte Flash
- Dual-core cortex M0+ at up to 133MHz
- 264kByte multi-bank high-performance SRAM
- External Quad-SPI Flash with eXecute In Place (XIP)
- 3-pin ARM Serial Wire Debug (SWD) port
- Built-in LDO
WS2812 LilyPad RGB LED Module for Arduino
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
WS2812B 5V Addressable RGB IP67 Waterproof LED Strip – 5m
- 5 metres in total length.
- 60 LEDs per metre.
- 24-bit color control (8-bit PWM per channel).
- Each pixel has 16.8 million colours.
- The digital control interface with one wire.
- At full brightness, each RGB LED uses about 50 mA at 5 V for red, green, and blue light.
- Water-resistant.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
WS2812B RGB Shield Module
- Compatible with Arduino, using Arduino IDE for programming
- Support the OTA online
- Supporting the D1 MINI
- 1 x ADC pin ( 0 – 3.3V )
- Type: RGB LED Module
- Screen type: LED
- Dimensions: 22 x 22 mm
X Type Cross Holder For 22xx series Brushless Motor-2pcs.
- Material: Aluminium
- Product: X Type Cross Holder
- Weight: 4 gm
- Dimensions: Refer the Dimension Diagram
X2 ELF 88mm Micro Brushless Racing Frame
- Model: X2 ELF
- Material: Carbon Fiber
- Wheelbase:88 mm
- Arm Thickness:2 mm
X2 ELF 88MM Micro brushless racing kit
- Material: Carbon Fiber
- Wheelbase:88 mm
X6B 2.4G 6CH i-BUS PPM PWM Receiver for AFHDS
- Channels: 6(PWM), 8(PPM), 18(i-BUS)Model
- DSC port: PPM/PWM/i-BUS
- Dual Antenna
- Range: >300m
- Weight: 12 gm(Whole assembly)
- Compatible Transmitter: All AFHDS 2A Transmitter, for example, FS-i10 FS-i6, FS-i6S, FS-i6X, FS-i4, FS-i4X.
X850 mSATA SSD Expansion Board for Raspberry Pi
- Adds Extra Storage to Raspberry Pi
- Supports up to 1TB SSD
- Works On USB3.0
- No External Adaptor Required
Load more products
Loading...