Showing 3985–3996 of 4062 results
Shop
XBee 3 Module – PCB Antenna
- RF 250Kbps, Serial 1Mbps
- 200ft (indoor) to 4000ft (outdoor) range
- Transmit power +8dBM @ 40mA
- Receiver Sensitivity -103dBm @ 15mA
- 4x 10-bit ADC inputs
XBee 3 Pro Module – RP-SMA Antenna
- Product: XBee 3 Pro Module – RP-SMA Antenna
- 300ft (indoor) to 2mile (outdoor) range
- Transmit Power: +19dBM @ 135mA
- Receiver Sensitivity: -103dBm @ 15mA
- ADC Inputs: 4x 10-bit
- Product: XBee 3 Pro Module – RP-SMA Antenna
- 300ft (indoor) to 2mile (outdoor) range
- Transmit Power: +19dBM @ 135mA
- Receiver Sensitivity: -103dBm @ 15mA
- ADC Inputs: 4x 10-bit
XBee Pro S2C 63mW 802.15.4 Module without Antenna
- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
XBee PRO S2C SMD (U.FL Antenna) Module
- Works on ZigBee PRO 2007 Protocol
- Serial Data Inteface : UART, SPI
- Four 10 bit ADC Inputs
- 15 I/O Ports
XBee Shield V03 Module Wireless Control
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB2.0 protocol.
XBee USB adapter (CP2102)
- Compatible with all ZigBee modules (Series 1 and Series 2.5, standard and Pro)
- The built-in 3V3 Voltage regulator
- Onboard 3V3 <->5V level converter (easy to interface 5V Devices)
- Status LEDs ( RX,TX,RSSI,Power)
- Zig Bee Pins available at 2.54 mm berg strip
- All XBee pins are broken out.
- Reset button.
XBee USB Adapter FT232RL for Arduino with Cable
- Microprocessor: FT232RL.
- Power supply: 3.3V and 5V DC.
- Interface: Mini-B USB, 2.54mm pitch pin header.
- Adapter socket: XBee compatible 2.0mm pitch female pin header.
- 3.3V and 5V IO compatible.
- USB 2.0 protocol.
- Easily connected to a PC via mini USB cable.
- XBee compatible 2.0mm pitch female pin header
XD-21 LM358 Gain Amplification Module Operational Amplifier Module
- LM358 chip included.
- The circuit design’s 100 gain.
- You may change the magnification thanks to the 10K onboard adjustable resistance.
- power indicator on board.
- The chip’s principal pin, led, allows for direct signal input and output.
Xf model xf5806 5.8g 40ch 25/100/200/400mw video Switchable FPV VTX transmitter
- Model: XF5806_V2
- Input voltage: 7-26V
- Onboard BEC output: 5V
- Channels: 40CH
- Transmitting: 25/100/200/400mW Switchable
- Video format: PAL/NTSC
- Control protocol: TBS Smartaudio V2
- Antenna connector: MMCX
- Wiring: pad
- Mounting hole: 20*20mm
XH W1209 12V Digital Temperature Controller Module W/ Display and NTC Temp Sensor
- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
XH-A153 BlueTooth 5.0 Lithium Battery Holder Dual Channel 2*5W Stereo Class D Audio Amplifier Active Speaker DIY
- Brand name: Bluetooth board for audio amplifier
- Make: XH-A153
- Type of function: Audio amplifier
- Voltage of power supply: DC5V
XH-A232 TPA3110 30W+30W 2.0 Channel Digital Stereo Audio Power Amplifier Board
- Original core technology of TPA3110
- Simple Plug-and-Play Function
- Adaptive functioning 12 to 24 volts in the high fidelity range Two 30W outputs.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Load more products
Loading...