Showing 409–420 of 516 results
Shop
Raspberry Pi Official Mini HDMI C/M to Standard HDMI A/F Cable 10CM White
- Nickel Plated Connector Pins
- Fully triple shielded for increased noise immunity
- Length: 10cm
- 4Kp60 compliant
- 20Mohm 300VDC insulation withstands 300VDC for 0.1s
- Compatible with: Raspberry Pi Zero; Raspberry Pi Zero W; Raspberry Pi Zero W2
Raspberry Pi Pico
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
Raspberry Pi Pico Intermediate Kit
Raspberry Pi Pico Starter Kit
Raspberry Pi Pico W
- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB B port for power and data (and for reprogramming the flash)
- 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
- 23 GPIO are digital-only, with three also being ADC
Raspberry Pi Pico W (Pico Wireless)
- Infineon CYW43439 Wireless Chip
- Dual-core Arm Cortex-M0+ @ 133MHz
- 264KB (remember kilobytes?) of on-chip RAM
- 2MB on-board QSPI flash
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- 26 multifunction GPIO pins, including 3 analogue inputs
- 16 × PWM channels
- Temperature sensor
- Accelerated integer and floating-point libraries on-chip
Raspberry Pi Zero W (Wireless) With In-Built Wifi and Bluetooth
Readytosky 1104 7500KV Mini Brushless Motor
- Model: Readytosky 1104 7500KV Mini Brushless Motor
- Voltage: 7.4v to 11.1v
- Watts: 81.4W
- Max Current: 5.5A
- Dimensions: 14*16.5mm
- Shaft: 1.5mm
Real Time Clock DS1307 RTC I2C Module AT24C32 with Battery
Features :
- This is the DS1307 Real Time Clock developed by one of our designers.
- Two-wire I2C interface.
- Hour: Minutes: Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC with LIR2032 battery (Battery include).
- 1Hz output pin.
- Consumes less than 500nA in battery backup mode with oscillator running
- Available in 8-pin DIP or SOIC
- Underwriters Laboratory (UL) recognized
- Real-time clock (RTC) counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year compensation valid up to 2100
- 56-byte non-volatile RAM for data storage
- 56 Bytes of Non-volatile memory available to the user.
- The DS1307 is accessed via the I2C protocol.
- The module comes fully assembled and pre-programmed with the current time.
Package Includes :
1 x RTC DS1307 24C32 Real-Time Clock Module
Red R13-507 16mm No Lock Push, Button Momentary Switch 3A, 250V
- R13-507-M-5S is the model.
- Material: Metal and plastic.
- Two-pin terminals.
- Action Type: Push and Hold – ON, Release – OFF, Momentary Action.
RF Transmitter Receiver Module 315MHz Wireless Link Kit For Arduino
- Operating voltage: 5V.
- Quiescent Current: 4mA.
- Receiving frequency: 315MHz.
- Receiver sensitivity: -105 dB.
- Communication Distance (m): 20 ~ 200 meter.
RF433 MHz Transmitter Receiver Wireless Module
- RX Receiver Frequency : 433 MHz
- RX Typical Sensitivity : 105 Dbm
- RX Supply Current : 3.5 mA
- RX IF Frequency : 1MHz
- RX Operating Voltage : 5V
- TX Frequency Range : 433.92 MHz
- TX Supply Voltage : 3V ~ 6V
- TX Out Put Power : 4 ~ 12 Dbm
Load more products
Loading...







Motors