Showing 433–444 of 516 results
Shop
RTC Module DS3231 RTC Module Precise Real Time Clock I2C AT24C32
- 1 Hz output pin SQW.
- 32 KHz output pin 32K.
- Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
- Time Format: HH: MM: SS (12/24 hr).
- Date Format: YY-MM-DD-dd.
- DS 3231 based RTC with 2032 Battery Holder. FOR BULK B2B ENQUIRIES MAIL US @ibots.in
SanDisk Micro SD/SDHC 16GB Class 10 Memory Card (Up to 98MB/s Speed)
- Memory Size: 16 Gigabyte
- Card Type: Micro SD
- Speed: up to 98MB/s
- Class: 10
- High-speed Card can be used for both Mobile phone and Raspberry Pi
- 5 years of manufacturing defect Warranty Given by Sandisk.
SanDisk Micro SD/SDHC 32GB Class 10 Memory Card
- Memory Size: 32 Gigabyte
- Card Type: Micro SD
- Speed: up to 98MB/s
- Class: 10
- High-speed Card can be used for both Mobile phone and Raspberry Pi
- 5 years of manufacturing defect Warranty Given by Sandisk.
Set of Aluminum Heatsink for Raspberry Pi (Large and Small)
- Dimensions
- Large Heatsink: 14 x 14 x 7 (LxWxH) mm
- Small Heatsink: 9 x 9 x 5 (LxWxH) mm
- Teeth Number
- Large Heatsink: 6 Teeth
- Small Heatsink: 5 Teeth
- Compatible with most Raspberry Pi cases
- Can be used with other devices such as the Beaglebone
- Can be used with stepper motors, motor driver boards etc.
SG3525A – 35V Adjustable Output Regular Pulse Width Modulator IC DIP-16 Package
- IC Name: SG3525A
- Package/Case: DIP-16
SGM358YMS/TR – 1MHz 60uA Rail-to-Rail I/O CMOS Operational Amplifier MSOP-8
- IC Name: SGM358YMS/TR
- Package/Case: SMD-8
SIM 800C Module
- Quad-band 850/900/1800/1900MHz
- GPRS multi-slot class 12/10
- GPRS mobile station class B
- Compliant to GSM phase 2/2+
- Â Â Â Class 4 (2 W @ 850/900MHz)
- Â Â Â Class 1 (1 W @ 1800/1900MHz)
- Dimensions: 17.6*15.7*2.3mm
- Weight: 1.3g
- Control via AT commands
- Â Â Â (3GPP TS 27.007, 27.005 and SIMCom enhanced AT Commands)
- Supply voltage range 3.4 ~ 4.4V
- Low power consumption
- Operation temperature:-40℃ ~85℃
Sim800 Sim800L Gprs Gsm Chip
- SIM 800L Module is a complete Quad-band GSM/GPRS solution in an SMT type.
- Can be embedded in a project.
- It can smoothly fit into the slim and compact demands of customer design.
SIM800A Quad Band GSM/GPRS Module with RS232 Interface
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
smart Robot Car 2WD Chassis Kit With Ultrasonic Module R3 Board – B0B8W7W24D
It is quite common for compatible Arduino boards to include the CH340 chip instead of the FT232RL that the original Arduino boards have. These chips are responsible for managing the USB interface of the board. Since these chips manage the communication between our Arduino and the PC, we must have the appropriate driver installed for them to work without problems.
Compatible Arduino boards work correctly on some system versions and with some versions of the IDE. However, there are some system-IDE combinations where the original Arduino IDE is not able to communicate with our compatible Arduino board
SmartElex GPS Data Logger Shield for Arduino
- The multi-GNSS engine for GPS, GLONASS, Galileo, and QZSS.
- Embedded patch antenna.
- Automatic antenna switching function.
- High sensitivity: -167dBm @Tracking, -149dBm @Acquisition.
- 99 acquisition channels, 33 tracking channels.
- Balloon mode, for high altitude up to 80km.
- Support DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN).
- Great anti-jamming performance due to multi-tone active interference canceller.
- Support SDK command developed by Quectel.
Load more products
Loading...







Motors