Showing 433–444 of 511 results
Shop
SG3525A – 35V Adjustable Output Regular Pulse Width Modulator IC DIP-16 Package
- IC Name: SG3525A
- Package/Case: DIP-16
SGM358YMS/TR – 1MHz 60uA Rail-to-Rail I/O CMOS Operational Amplifier MSOP-8
- IC Name: SGM358YMS/TR
- Package/Case: SMD-8
SIM 800C Module
- Quad-band 850/900/1800/1900MHz
- GPRS multi-slot class 12/10
- GPRS mobile station class B
- Compliant to GSM phase 2/2+
- Class 4 (2 W @ 850/900MHz)
- Class 1 (1 W @ 1800/1900MHz)
- Dimensions: 17.6*15.7*2.3mm
- Weight: 1.3g
- Control via AT commands
- (3GPP TS 27.007, 27.005 and SIMCom enhanced AT Commands)
- Supply voltage range 3.4 ~ 4.4V
- Low power consumption
- Operation temperature:-40℃ ~85℃
Sim800 Sim800L Gprs Gsm Chip
- SIM 800L Module is a complete Quad-band GSM/GPRS solution in an SMT type.
- Can be embedded in a project.
- It can smoothly fit into the slim and compact demands of customer design.
SIM800A Quad Band GSM/GPRS Module with RS232 Interface
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
smart Robot Car 2WD Chassis Kit With Ultrasonic Module R3 Board – B0B8W7W24D
It is quite common for compatible Arduino boards to include the CH340 chip instead of the FT232RL that the original Arduino boards have. These chips are responsible for managing the USB interface of the board. Since these chips manage the communication between our Arduino and the PC, we must have the appropriate driver installed for them to work without problems.
Compatible Arduino boards work correctly on some system versions and with some versions of the IDE. However, there are some system-IDE combinations where the original Arduino IDE is not able to communicate with our compatible Arduino board
SmartElex GPS Data Logger Shield for Arduino
- The multi-GNSS engine for GPS, GLONASS, Galileo, and QZSS.
- Embedded patch antenna.
- Automatic antenna switching function.
- High sensitivity: -167dBm @Tracking, -149dBm @Acquisition.
- 99 acquisition channels, 33 tracking channels.
- Balloon mode, for high altitude up to 80km.
- Support DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN).
- Great anti-jamming performance due to multi-tone active interference canceller.
- Support SDK command developed by Quectel.
SMPS Power Adaptor – 12V/2A (Power supply)
The SMPS Power Adaptor – 12V/2A (Power supply) is a Switched mode power supply (SMPS). This is the advanced power supply and better than conventional ones. If you want low losses and stable output also you don’t want to make a rectifier, so go for SMPS.
You can use this SMPS Power Adaptor – 12V/2A to power-up the Arduino UNO/Arduino MEGA, DC motors, LCD screens, DVD players, Hard Drives, Audio Gear, and most other digital devices use less than 2 Amperage.
This is a high-quality AC to DC Switching Power Adapter which gives a clean regulated 12VDC output at up to 2A. These adapter work with 240VAC input, allowing them to work with household supply. The barrel plug attached to these wall adapters are center positive with 2.1mm diameter.
It is an AC 100~240V to DC 12V 2A Power Adapter/Buck Converter/Switching Power Supply/Transformer/Charger, Applied to the Charging equipment/Small table lamp/Router/TV Box/Mini TV etc/tablet PC/ 2.5-inch mobile hard disk/mobile DVD/Power Tools etc.
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
Soil Moisture Sensor Module
- Operating Voltage (VDC) : 3.3V – 5V
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- LM393 comparator chip
Soldering cleaning sponge (7CMX5.5CM)
- Removes all Solder Residue
- Shape & Size: Square (70mm x 55mm)
- Low cost and high-quality solder sponge.
- Ideal replacement for the old sponges.
- Solder sponge removes excess solders from soldering iron tips
- Provides extended tip life
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance







Motors