Showing 445–456 of 516 results
Shop
SMPS Power Adaptor – 12V/2A (Power supply)
The SMPS Power Adaptor – 12V/2A (Power supply) is a Switched mode power supply (SMPS). This is the advanced power supply and better than conventional ones. If you want low losses and stable output also you don’t want to make a rectifier, so go for SMPS.
You can use this SMPS Power Adaptor – 12V/2A to power-up the Arduino UNO/Arduino MEGA, DC motors, LCD screens, DVD players, Hard Drives, Audio Gear, and most other digital devices use less than 2 Amperage.
This is a high-quality AC to DC Switching Power Adapter which gives a clean regulated 12VDC output at up to 2A. These adapter work with 240VAC input, allowing them to work with household supply. The barrel plug attached to these wall adapters are center positive with 2.1mm diameter.
It is an AC 100~240V to DC 12V 2A Power Adapter/Buck Converter/Switching Power Supply/Transformer/Charger, Applied to the Charging equipment/Small table lamp/Router/TV Box/Mini TV etc/tablet PC/ 2.5-inch mobile hard disk/mobile DVD/Power Tools etc.
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
Soil Moisture Sensor Module
- Operating Voltage (VDC) : 3.3V – 5V
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- LM393 comparator chip
Soldering cleaning sponge (7CMX5.5CM)
- Removes all Solder Residue
- Shape & Size: Square (70mm x 55mm)
- Low cost and high-quality solder sponge.
- Ideal replacement for the old sponges.
- Solder sponge removes excess solders from soldering iron tips
- Provides extended tip life
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Soldering Gun Iron Stand
- Soldering Stand Size : 102 x 57 mm (LxW).
- Weight: 106 gm.
- Nickel-plated wide spring holder
- Robust and powerful base to uphold the weight of soldering irons varying from 30w, 35w, 40w, 50w, 60w and 75w
Soldering Wire 1.0mm 100g
- Material: Tin.
- Wire Diameter: 1.0mm
- Flux: 1.8%
- Item weight: 100g
- Package weight: 110g
- Widely applied in electrical repairs
- Easy to use, flows well and heats evenly.
- With the solder wire reel, soldering can be accomplished quickly.
Solderless 400 pin breadboard
features:
- 400 tie points
- 1 Double strip, Total 300 tie points
- 2 Power lanes, Total 100 tie points in power lanes
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
Soldron High-Quality 25 Watts/230Volts Soldering Iron
- Attains full operating Temperature within a seconds.
- Maintains constant tip temperature.
- Low Leakage Current.
- Safe for the use on dedicated and sensitive Components.
- Maximum Heat transfer efficiency.
- Slide on a Replaceable tip.
- Cool Grip Insulating Nylon Handle
- High Quality Built Material.
Solenoid Valve 12v-24v (Blue)
Operating Voltage: 12V / 24V DC
Current Requirement: 400 mA
Connections: Push Fit Type
Nozzle Diameter: 6.3 mm
Normally Closed Valve
SPC20480-Jumper, Shunt, 2Mm, 2Way (Pack of 5)
- compatible with 2 mm pin headers
- Type of Accessory: Microshunt Jumper
- Suitable for Header Strips Use
- 12-month limited warranty; for further information, see the Terms & Conditions
- 96% of clients said they would suggest to a friend
ST DIP 555 Timer IC
| Brand | ST |
| Usage/Application | Electronics |
| Mounting Type | DIP |
| Part Number | 555 IC |
| Type | Leaded |
| Package | DIP |
| Voltage | 5V |
| Minimum Order Quantity | 50 Piece |
Standard 12V 1A Power Supply with 5.5mm DC Plug
- Voltage input: 100–270 VAC, 50/60 Hz
- 12V/1A at the output
- Extremely low power usage when not in use.
- Incredibly effective, long-lasting, little, and robust.
- Using the adapter is simple.







Motors