Showing 469–480 of 2380 results
Shop
Adafruit Feather M4 Express – Featuring ATSAMD51 – ATSAMD51 Cortex M4
- ATSAMD51 32-bit Cortex M4 core
- 512 KB flash, 192 KB RAM
- 3.3V regulator with 500mA peak current regulator
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
Adafruit Feather RP2040
- RP2040 32-bit Cortex M0+ dual-core running at ~125 MHz
- 8 MB SPI FLASH
- Built-in 200mA+ lipo charger
- On-board STEMMA QT / Qwiic connector
- 3.3V regulator with 500mA peak current output
- USB Type C connector
- 264kB on-chip SRAM
- 21 x Multifunction GPIO
- 3.3V regulator with 500mA peak current output
Adafruit FONA 808 – Mini Cellular GSM + GPS Breakout
- Model: Adafruit FONA 808 – Mini Cellular GSM + GPS Breakout
- Quad-band: 850/900/1800/1900MHz
- Accuracy: approx. 2.5 meters
- Tracking: 22
- Acquisition channels: 66
Adafruit MAX98357A I2S 3W Class D Amplifier Breakout Board
- Output Power: 3.2W at 4Ω, 10% THD, 1.8W at 8Ω, 10% THD, with 5V supply
- PSRR: 77 dB typ @ 1KHz
- I2S sample rates from 8kHz to 96kHz
- No MCLK required
Adafruit SGP30 Air Quality Sensor Breakout – VOC and eCO2 – STEMMA QT / QwiicRoHS Compliant
- Easy to use
- Color: Black
- SCL – I2C clock pin
- SDA – I2C data pin
- Power Pins: Vin
- Voltage: 3.3V
Adafruit SGP40 Air Quality Sensor Breakout – VOC Index – STEMMA QT/Qwiic
- Circuit: SGP40
- Supply voltage: 3 V to 5 V
- Communication interface: I2C
- I2C communication interface address: 0x59
- VOC Measuring range: 0 ppm to 1000 ppm
- VOC index value Measuring range: 0 to 500
- Connectors: STEMMA QT / Qwiic
Adafruit STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable – 150mm Long
The Adafruit STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable is a convenient cable for connecting devices with STEMMA QT or Qwiic connectors to development boards or other hardware with male header pins. The cable has a length of 150mm, providing enough flexibility for various prototyping and project needs. It’s a handy accessory for interfacing sensors, displays, and other peripherals with compatible platforms, allowing for quick and easy connections without the need for soldering.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Adapter Breakout Board for ESP-32f ESP32 ESP-Wroom-32 Wireless Bluetooth Module
- For ESP32
- Onboard Reset button and flashing firmware button
- Includes the adapter board and male double row pins connectors (not soldered)
ADK USB Host Shield compatible with Arduino
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
ADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier
- Broad Voltage Range: 2.0 to 5.5 volts
- Minimal Use of Current
- Only 150µa in continuous mode; one-shot auto shutdown
- Programmable data rate of 8 to 860 bps
- Internal low-drift voltage reference is included.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
AHT20 Temperature and Humidity Sensor -40 to 85 Deg C
- Operating Voltage: 2.0-5.5VDC
- Measuring Range (humidity): 0% to 100% RH
- Temperature Range: -40°C to +85°C
- Output Interface: Grove I2C Interface
- Excellent long-term stability
- SMD package suitable for reflow soldering
AHT21 Integrated temperature and humidity sensor -40 ~ + 120 ℃
- Supply voltage: DC : 2.2 – 5.5V
- Measuring range (humidity): 0 ~ 100% RH
- Measuring range (temperature): -40 ~ + 120 ℃
- Humidity accuracy: ± 2 % RH ( 25 ℃ )
- Excellent long-term stability
- SMD package is suitable for reflow soldering FOR BULK B2B ENQUIRIES MAIL US @ibots.in
Load more products
Loading...