Showing 601–612 of 2389 results
Shop
Atomstack X20 Pro 130W Quad-Laser Engraving and Cutting Machine Built-in Air Assist System
- 130W of machine power
- 90W of electricity
- 20–21 W of laser output power
- Length of Wave: 445 ± 5 nm
- Precision of engraving: 0.01 mm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
ATTINY85 USB Development Board
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
- Power via USB or External Source or 7-16 v to 5 v (automatic selection).
- The Onboard, 150 ma 5 v Regulator.
- Built-in USB and serial were debugging).
- 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
- 8 k Flash Memory (about 6 k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.
ATX 24P M-F Extension Power Lines About 30CM
- ATX 24P is the model.
- Product: Power Line Extensions
- Colour: As shown in the pictures
- Measurements in length: 30 cm
- Features of cable: 2-24-pin
Audio Jack – 3.5mm TRRS (SMD)- 4Pcs
- Certification: REACH and RoHS
- Model DG
- 220V is the rated voltage
- Rated Current: 0.5 MA
- Material: POM plastic (POM-450 Japan), 59% copper rod
- Test for Salt Spray: 24 hours
- Female gender
- Durability More than 5000 cycles
Auto-Calibrating Line Sensor LSS05
- 5V power, reserve polarity protected
- 5 digital outputs representing the logic of 5 IR sensor, represented with indicator each.
- Calibration button for easily calibrating the sensor
- Dimensions: 64x28x10 (LxWxH) mm.
- Weight: 8 gm.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
AUTOMOBILE SEAT OCCUPANCY SENSORS
- Car Seat Pressure Sensor Safety Belt Warning Reminding Pad Occupied Seated Alarm is a safety belt reminder system in the vehicle triggers a warning light or an audible bell ring, reminding unbuckled seat occupants to fasten their safety belts.
- The seat safety belt reminder sensor detects occupants in passenger and rear seats.
- It is assembled between the sponge and the steel base. It provides maximum safety for passengers in car.
AVerMedia D131L Carrier Board for NVIDIA® Jetson Orin™ NX / Orin™ Nano modules
2 x 2 Lane MIPI CSI-2 Camera input/ 1 x 4 Lane MIPI CSI-2 Camera Input
2 x M.2. for Wi-Fi, SSD and Capture card
1 x GbE RJ-45 (Option PoE), 40-pin expansion header
4 x USB 3.1 Gen 1 and 1 x 4Kp60 HDMI output
1 x micro-SD card slot
Operating temperature: 0°C ~ 70°C (TBD)
Dimension: 113mm(W) x 105mm(L) x 28.53 mm(H)
Weight: 95g
AVR ISP 10 Pin to 6 Pin Adapter Board
- Made of high-quality material, practical and durable
- No. of Pinon USBASP side: 10.
- No. of Pinon Device under programming side: 6.
- Connector type on USBASP side: Male.
- Connector type on Device under programming side: Female.
- Header Pin Pitch: 2.54mm (0.1in).
- Pin Numbers Text: Yes on Top and Bottom sides of every pin.
B201 Blue V6Z Cooling Fan Cover for 3D Printer
- Measurements: 30 x 30 x 22 mm
- Use: Case for 3D Printer
- Dark Blue in colour
B2X2 4 Elements Infrared Motion Analog PIR sensor for Lighting
- Quad Elements
- Same horizontal and vertical detection angles
- Slight movement can be detectable
- Low power Consumption
B3950 10K NTC Thermistor Temperature Sensor 5*25mm with XH2.54 Connector with 0.5 Meter Cable
- Material: stainless steel
- style: B3950; probe sheath Ten Thousand
- Value of resistance: 10K ± 1%
- Range of measurement: -20 to 105 °C
- Length of Cable: 0.5 Metre
BAK NMC 18650 3.6V 2600mAh 3C Li-ion Battery
- NMC 18650 is the model.
- Current: 4A 25°C; Voltage: 3.6V
- Capacity at nominal: 2600mAh
- Type of battery cell: (3C)
Load more products
Loading...