Showing 637–648 of 4075 results
Shop
5V 8W Mini Portable USB Soldering Iron Pen With Touch Switch Protective
- Power: 5V DC / 8W
- LED indicator
- Material: Plastic, Metal
- Colour: Black
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
5V A4178 FS4010 Brushless DC Cooling Fan with 2Pin Cable
- Voltage of Brushless Cooling Fan: 5V
- Connector: Two-pin connector
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
5V Active Alarm Buzzer Module for Arduino
- Voltage range for the PCB: 3.3V to 5V
- Measurements: L = 29 x W = 14 x H = 12 mm
- 20 cm is the wire length.
- 7 grammes in weight.
- 2500 Hz is the frequency.
5V Active Electromagnetic Buzzer
- Input Voltage(Max.) : 5V
- Resonance Frequency: 2048 Hz
- Sound pressure(dB(A)/10cm)min.: 80
- Body Size : 12 x 9.5mm
- Pin Pitch: 6mm
- External Material: Plastic;
- Color: Black
5V Dual Channel Relay Module with Optocoupler
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
5V Mini Fan for Raspberry Pi
- Raspberry PI dedicated cooling fan, Ultra-quiet, Large air flow , low noise , high performance cooling suitable for all models of Raspberry Pi 3,PI B/2, PI B and PI 1.
- his fan is suitable for use on any machine that requires heat dissipation and can be equipped with a fan.
- Can be used alone 3.3V or 5V power supply, current 0.2A, two kinds of interface lines, stable work.
- Fan Size 30mmx30mmx10mm, Noise 18dB , Weight 18g, cable length 6cm, convenient for DIY
- It comes with 2 pin Connector.
5V Passive Buzzer-10 Pcs.
- Maximum Input Voltage: 5V
- 42 Ω of resistance
- Rate of Resonance: 2048 hertz
- Size of Body: 12 x 8 mm
- Pin Diameter: 6 mm
- External Colour: Black
- Material: Plastic
5V Relay Module with USB Control 1 Channel Module
Features :
- The onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is in the closed state, the red disconnect
- Military-grade PCB board production.
- Use genuine pine music relay
- Support Windows 7, XP 32-bit systems
5V Step-Up Power Module Lithium Battery Charging Protection Board USB For DIY Charger 134N3P
- 2.9V is the BAT Discharging Stop Voltage.
- 85% of the discharge is efficient (input 3.7V, output 5V/1A).
- indication of charging and discharging
- Power MOS for charging and discharging embedded internally
- 4.2V charging voltage preset, accuracy ±1%
- Maximum 8 uA standby current Integrated charging and discharging control
- Overheating prevention and intelligent temperature control
- Combining short circuit, overload, and overvoltage protection in the output
5V USB Aluminium Body Power Bank Case for 18650 Battery
- Power input: 5 V DC at up to 1.5 A
- Stabilised Output Power: 5 V DC at up to 1 A
- Aluminium Case with Style and Compact Size.
- Stunning powder coating in vibrant colours
5V USB Aluminium Body Power Bank Case for 18650 Battery-BLACK
- Power input: 5 V DC at up to 1.5 A
- Stabilised Output Power: 5 V DC at up to 1 A
- Aluminium Case with Style and Compact Size
- Stunning powder coating in vibrant colours
5V-12V DC Brushless Driver Board Controller For Hard Drive Motor 3/4 Wire
Voltage of drive: DC 5-l2V
Work current: 1.2A or less
Range of speed: 0% to 100%
Control of phase inversion: Yes
Protection from voltage polarity: Yes
Load more products
Loading...







Motors