Showing 685–696 of 2389 results
Shop
CHAM CMINR14500F2 3.6V 850mAh 2C AA Size Li-ion Battery
- 3.6 V nominal voltage and 850 mAh battery capacity
- Life Cycle: Approximately 800 Times
- Charging Voltage Maximum: 4.2 V (±0.05)
- Sure, it’s rechargeable.
Charger / Battery / Screwdriver Tools Storage Bag
Lightweight
Blue in colour
Content: Polyester
It can open and close with a zip.
Measurements: 23 x 18 x 3 mm Ideal for storing your tools
Charger Adapter Cable Deans T Plug Female To Glow ignitor Connector For Nitro Power RC Car Airplane Boat
- Lightweight
- Color: Red & Black
- Easy to install
- Easy to connect
Chassis Jumbo
- Dimensions: 200 x 11o x 50 mm(LxWxH)
- Weight: 170 gm.
- Color: Black(External)
- Material: Metal sheet
- Sheet Thickness: 0.75 mm.
- Motor Fitting Hole Diameter: 13.75 mm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Chassis Jumbo 2
- Heavy Metal and powder coated
- Many mounting holes have given for easy attachment of development board, sensor modules, etc
- Dimensions: 250 x 13o x 60 mm(LxWxH)
- Weight: 230 gm.
- Color: Black(External)
- Material: Metal sheet
- Sheet Thickness: 0.75 mm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
CJMCU 64 Bit 8×8 RGB LED Driver Development Board
- Dimensions : 66 x 66 x 3 mm.
- Weight : 25 gm.
- Supply Voltage : 5 VDC.
- Interface : IO .
- 8 x 8 = 64 RGB.
- Chip : WS2812b.
CJMCU MCP4725 I2C DAC Breakout Development Board
- Resolution of 12 bits
- little bundle
- supply ranging from 2.7V to 5.5V
- Internal EEPROM for storing configuration data I2C Interface (supporting Standard, Fast, and High-Speed modes)
CJMCU TCA9548A I2C 8 Channel Multiple Extensions Development Board
- Low Standby Current.
- 1-to-8 Bidirectional Translating Switches.
- I2C Bus and SMBus Compatible.
- 5-V Tolerant Inputs.
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
CJMCU-123 WS2812 RGB LED Breakout Module
- 5V is the supply voltage.
- Angle of view: 120 degrees
- The light’s hue remained remarkably constant.
- A lamp strip with a full-color soft light module.
- Electric reset and power loss reset circuits built in.
- A full-color display with 16 million colours and 256 brightness levels is possible for each of the three primary colour pixels, provided that the scan frequency is at least 400 Hz/s.
CJMCU-219 INA219 I2C Interface Power Supply Monitoring Module.
Features:
- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- 0.9″ x 0.8″ PCB
- PCB (no header or terminal block): 1.9g
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power
- 16 Programmable Addresses
- Filtering Options
- Calibration Registers
- SOT23-8 and SOIC-8 Packages
CJMCU-34725 TCS34725 Color Sensor RGB Module
- Current Voltage: 3.3 volts
- Voltage of supply: 3.3V–5V
- Bright light sensing and red, green, and blue (RGB) digital return values are provided by the TCS3472 device.
- Accuracy in colour management is higher.
- the extreme sensitivity.
- broad dynamic range.
- With its IR shading filters, the TCS3472 is perfect.
CJMCU-4051 74HC4051 8 Channel Analog
Wide Analog Input Voltage Range: +/-5V
2.Low “ON” Resistance: 80 ohm (type) at Vcc = 4.5V; 70 ohm (type) at Vcc = 6.0V; 60 ohm (type) at Vcc = 9.0V
3.Logic Level Translation: to enable 5V to communicate with +/-5V analog signals
4.Board Size: 30 x 19 mm
Load more products
Loading...