Showing 805–816 of 2380 results
Shop
DC5V 8010 Oil Containing Cooling Fan with XH2.54-2P 30CM Cable Size:80*80*10MM
- 80 x 80 x 10 mm casing Frame size
- 70 mm mounting hole spacing
- Cable Length 30 CM
- Ready to plug Connector for Pi board
- Colour: Black
- RPM: 2800±10%RPM
DC7V-12V Brushless Motor Driver Controller Board For Hard Drive Motor 3/4 Wire
- Driver voltage: DC7-12V
- Working voltage: ≤1.2A
- Speed adjust:0%-100%
- Color: Green and Black
Degson 3 Pin 5mm PCB Terminal Block
- The model is DG301-5.0-03P.
- Size of pitch: 5.0 mm
- Voltage rating: 250V (III/2)
- Rated current: 17.5 amps
- Compatibility of wire sizes: 1.5mm²
- Material in contact with the surface: Tiny
- Connector technique: Wire-protected screw connector
Degson 4 Pin 2.5mm Pitch Pluggable Terminal Block Socket
- Diameter: 2.5 mm
- There are four pins.
- Voltage rating: 300V
- Current rating: 8A
Degson DIN Rail DGK12-003 Housing Length 161.6mm , DIN 43880 standard
- Length: 161.6 mm; compliant with DIN 43880.
- Contemporary style
- Adaptable PCB connector
- heightened effectiveness Optional is a DIN rail connector.
- Working Temperature (°C): -40°C to +110°C
- Material: PC, or polycarbonate
DF Robot Gravity PH3 Sensor (Calibrated) – I2C & UART
- Detection Gas: CO, O2, NH3, H2S, NO2, HCL, H2, PH3, SO2, O3, CL2, HF(Need to change different probe).
- Working Voltage: 3.3~5.5V DC.
- Working Current: <5mA.
- Output Signal: I2C, UART output (0~3V), analog voltage (see the characteristic parameters of specific probe).
- Working Temperature: -20~50℃.
DF13 4 Pin Flight Controller Cable
- Item Name: DF13 4 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 4 pin
- Length: 200mm(28AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
DF13 5 Pin Flight Controller Cable
- Weight: about 3g
- Plug Type: DF 13 5 pin
- Length: 200mm(26AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
DF13 6 Pin Flight Controller Cable
- Item Name: DF13 6 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 6 pin
- Length: 200mm(26AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
DFRobot Dual-channel RS485 Expansion Hat for Raspberry Pi 4B
- Operating Voltage: 3.3V
- RS485 Transceiver: TP75176E
- Serial Chip: CH432T
- RS485 Communication Interface ×2
- Raspberry Pi 3B+/4B Supported
- Mounting Hole Size: diameter 2.5mm
DFRobot Fermion BMX160 9-axis Sensor (Breakout)
- 3.3v to 5.5 volts for operation
- Minimal Power Requirement
- Elevated Precision
- I2C Small-Sized Communication
DFRobot Fermion: AS7341 11-Channel Visible Light Sensor (Breakout)
- Power Supply: 3.3V~5V
- Visible Light Detection Range: F1(405-425nm), F2(435-455nm), F3(470-490nm), F4(505-525nm), F5(545-565nm), F6(580-600nm), F7(620-640nm), F8(670-690nm)
- Operating Current(LED Off): <5mA
- LED Driving Current: Class 1-20 (4-42mA)
- I2C Address: 0x39
- Operating Temperature Range: -30℃~85℃ FOR BUL B2B ENQUIRIES MAIL US @ibots.in
Load more products
Loading...