Showing 805–816 of 2404 results
Shop
DC12V 42N 10mm Push Pull Solenoid Electromagnet
- DC model 10V, 10mm, 42N
- 12 is the rated operating voltage (VDC)
- Push-pull (normally closed) operation mode
- Retention Factor (N): 42
DC12V 7010 Oil Containing Cooling Fan with XH2.54-2P 25CM Cable Size:70*70*10MM
- 70 x 70 x 10 mm casing Frame size
- 60 mm mounting hole spacing
- Cable Length 25 CM
- Color: Black
- RPM:3482±10%RPM
DC15V-36V-15A 500W Brushless Motor Controller Hall Motor Balanced Car Driver Board with Hall Drive
- Voltage range: 15V-36V
- Peak current: 20A
-
PWM speed control: PWM frequency 1-20KHZ
-
Duty cycle: 0-100%
- Drive power: ≤ 500W
DC24V 0.3N 10mm Push Pull Solenoid Electromagnet
- Model: DC 24V 10mm 0.3N
- Rated Operating Voltage (VDC): 24
- Operation Mode: Push-Pull (Normally Closed)
- Holding Force: 0.3 N
- Weight:43 gm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
DC24V 4010 Double Ball Cooling Fan with XH2.54-2P 30CM Cable Size:40*40*10MM
- 40 x 40 x 10 mm casing Frame size
- 35 mm mounting hole spacing
- Cable Length 30 CM
- Ready to plug Connector for Pi board
- Colour: Black
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
DC5V 0.25A 5015 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
- Radial cooling fan, 45 mm.
- DC 0.25A, 2-point Pin, 5V.
- Kind: Hydraulic
- Composed of premium PBT 30% glass line VO
- A bearing has a long lifespan, great precision, and little noise.
- Great for cooling prints, heat sinks on hot ends, and other cooling requirements
DC5V 5010 Oil Containing Cooling Fan with USB Size:50*50*10MM
- 50 x 50 x 10 mm casing Frame size
- 40 mm mounting hole spacing
- Cable Length 90 CM
- Ready to plug Connector for Pi board
- Colour: Black
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
DC5V 8010 Double Ball Cooling Fan with USB Size:80*80*10MM
- Casing: 80 x 80 x 10 mm 35 mm mounting hole spacing on the frame
- 90 cm in cable length
- Pi board connector that is ready to plug in
- Black in colour
DC5V 8010 Oil Containing Cooling Fan with XH2.54-2P 30CM Cable Size:80*80*10MM
- 80 x 80 x 10 mm casing Frame size
- 70 mm mounting hole spacing
- Cable Length 30 CM
- Ready to plug Connector for Pi board
- Colour: Black
- RPM: 2800±10%RPM
DC7V-12V Brushless Motor Driver Controller Board For Hard Drive Motor 3/4 Wire
- Driver voltage: DC7-12V
- Working voltage: ≤1.2A
- Speed adjust:0%-100%
- Color: Green and Black
Degson 3 Pin 5mm PCB Terminal Block
- The model is DG301-5.0-03P.
- Size of pitch: 5.0 mm
- Voltage rating: 250V (III/2)
- Rated current: 17.5 amps
- Compatibility of wire sizes: 1.5mm²
- Material in contact with the surface: Tiny
- Connector technique: Wire-protected screw connector
Degson 4 Pin 2.5mm Pitch Pluggable Terminal Block Socket
- Diameter: 2.5 mm
- There are four pins.
- Voltage rating: 300V
- Current rating: 8A
Load more products
Loading...