Showing 817–828 of 2389 results
Shop
DF13 6 Pin Flight Controller Cable
- Item Name: DF13 6 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 6 pin
- Length: 200mm(26AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
DFRobot Dual-channel RS485 Expansion Hat for Raspberry Pi 4B
- Operating Voltage: 3.3V
- RS485 Transceiver: TP75176E
- Serial Chip: CH432T
- RS485 Communication Interface ×2
- Raspberry Pi 3B+/4B Supported
- Mounting Hole Size: diameter 2.5mm
DFRobot Fermion BMX160 9-axis Sensor (Breakout)
- 3.3v to 5.5 volts for operation
- Minimal Power Requirement
- Elevated Precision
- I2C Small-Sized Communication
DFRobot Fermion: AS7341 11-Channel Visible Light Sensor (Breakout)
- Power Supply: 3.3V~5V
- Visible Light Detection Range: F1(405-425nm), F2(435-455nm), F3(470-490nm), F4(505-525nm), F5(545-565nm), F6(580-600nm), F7(620-640nm), F8(670-690nm)
- Operating Current(LED Off): <5mA
- LED Driving Current: Class 1-20 (4-42mA)
- I2C Address: 0x39
- Operating Temperature Range: -30℃~85℃ FOR BUL B2B ENQUIRIES MAIL US @ibots.in
DFRobot Fermion: ENS160 Air Quality
DFRobot Fermion: MEMS Gas Sensor – MiCS-2714 (Breakout)
- Operating voltage: 4.9~5.1V DC
- Power dissipation: 0.45W
- Output signal: Analog quantity
- Measuring range:1 – 1000ppm(Hydrogen H2) ,0.05 – 10ppm(Nitrogen dioxide NO2 )
- Working temperature: -30~85℃
- Working humidity: 5~95%RH (No condensation)
- Storage temperature: -40~85℃
- Lifespan: >2 years(in the air)
DFRobot Fermion: MEMS Gas Sensor – MiCS-5524 (Breakout)
- Detection of Physical Quantities: Gas concentration or gas leakage of NO, NO2, H2
- Operating voltage: 4.9 ~ 5.1 V DC
- Power dissipation: 0.45 W
- Output signal: Analog quantity
- Working temperature: -30 ~ 85 °C
- Working humidity: 5 ~ 95%RH (No condensation)
- Storage temperature: -40 ~ 85 °C
- Lifespan: >2 years (in the air)
DFRobot FireBeetle 2 Board ESP32-S3 (N16R8) AIoT Microcontroller with Camera (Wi-Fi & Bluetooth on Board)
- Operating Voltage: 3.3V
- Max Charging Current: 1A
- Operating Temperature: -20 to 70℃
- Processor: Xtensa® dual-core 32-bit LX7 microprocessor
- Main Frequency: 240 MHz
- SRAM: 512KB
- ROM: 384KB
- Flash: 16MB
DFRobot FireBeetle ESP32-E IoT Microcontroller with Header (Supports Wi-Fi & Bluetooth)
- Operating Voltage: 3.3V.
- Input Voltage: 3.3V~5.5V.
- Support Low-Power: 2mA.
- Support USB Charging.
- GDI Display Port, easy to connect.
DFRobot Gravity Air Pressure Sensor (15-700kPa) – I2C – MPX5700AP
- Detection of physical quantities: Air pressure.
- Working voltage: 3.3~5.5V DC.
- Power dissipation: 0.06W(5)V.
- Epoxy resin integral components.
- Maximum error of 2.5%.
DFRobot Gravity DHT22 Temperature & Humidity Sensor
- 5V is the supply voltage.
- Variation Range: -40 to 80°C / Resolution: 0.1°C / Error: <±0.5°C
- Range for Humidity: 0–100% RH, resolution: 0.1% RH, error: ±2% RH
- Map of wiring: VCC, GND, S
- Dimensions: 38 x 20 mm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
DFRobot Gravity ENS160 Air Quality Sensor
- Power Supply Voltage: 3.3 V~5.5 V
- Working Current: 29 mA
- Interface Mode: I2C
- Less than 3 minutes warm-up time, get data faster.
- Built-in algorithm, more accurate output.
Load more products
Loading...