Showing 817–828 of 2404 results
Shop
Degson DIN Rail DGK12-003 Housing Length 161.6mm , DIN 43880 standard
- Length: 161.6 mm; compliant with DIN 43880.
- Contemporary style
- Adaptable PCB connector
- heightened effectiveness Optional is a DIN rail connector.
- Working Temperature (°C): -40°C to +110°C
- Material: PC, or polycarbonate
DF Robot Gravity PH3 Sensor (Calibrated) – I2C & UART
- Detection Gas: CO, O2, NH3, H2S, NO2, HCL, H2, PH3, SO2, O3, CL2, HF(Need to change different probe).
- Working Voltage: 3.3~5.5V DC.
- Working Current: <5mA.
- Output Signal: I2C, UART output (0~3V), analog voltage (see the characteristic parameters of specific probe).
- Working Temperature: -20~50℃.
DF13 4 Pin Flight Controller Cable
- Item Name: DF13 4 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 4 pin
- Length: 200mm(28AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
DF13 5 Pin Flight Controller Cable
- Weight: about 3g
- Plug Type: DF 13 5 pin
- Length: 200mm(26AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
DF13 6 Pin Flight Controller Cable
- Item Name: DF13 6 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 6 pin
- Length: 200mm(26AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
DFRobot Dual-channel RS485 Expansion Hat for Raspberry Pi 4B
- Operating Voltage: 3.3V
- RS485 Transceiver: TP75176E
- Serial Chip: CH432T
- RS485 Communication Interface ×2
- Raspberry Pi 3B+/4B Supported
- Mounting Hole Size: diameter 2.5mm
DFRobot Fermion BMX160 9-axis Sensor (Breakout)
- 3.3v to 5.5 volts for operation
- Minimal Power Requirement
- Elevated Precision
- I2C Small-Sized Communication
DFRobot Fermion: AS7341 11-Channel Visible Light Sensor (Breakout)
- Power Supply: 3.3V~5V
- Visible Light Detection Range: F1(405-425nm), F2(435-455nm), F3(470-490nm), F4(505-525nm), F5(545-565nm), F6(580-600nm), F7(620-640nm), F8(670-690nm)
- Operating Current(LED Off): <5mA
- LED Driving Current: Class 1-20 (4-42mA)
- I2C Address: 0x39
- Operating Temperature Range: -30℃~85℃ FOR BUL B2B ENQUIRIES MAIL US @ibots.in
DFRobot Fermion: ENS160 Air Quality
DFRobot Fermion: MEMS Gas Sensor – MiCS-2714 (Breakout)
- Operating voltage: 4.9~5.1V DC
- Power dissipation: 0.45W
- Output signal: Analog quantity
- Measuring range:1 – 1000ppm(Hydrogen H2) ,0.05 – 10ppm(Nitrogen dioxide NO2 )
- Working temperature: -30~85℃
- Working humidity: 5~95%RH (No condensation)
- Storage temperature: -40~85℃
- Lifespan: >2 years(in the air)
DFRobot Fermion: MEMS Gas Sensor – MiCS-5524 (Breakout)
- Detection of Physical Quantities: Gas concentration or gas leakage of NO, NO2, H2
- Operating voltage: 4.9 ~ 5.1 V DC
- Power dissipation: 0.45 W
- Output signal: Analog quantity
- Working temperature: -30 ~ 85 °C
- Working humidity: 5 ~ 95%RH (No condensation)
- Storage temperature: -40 ~ 85 °C
- Lifespan: >2 years (in the air)
DFRobot FireBeetle 2 Board ESP32-S3 (N16R8) AIoT Microcontroller with Camera (Wi-Fi & Bluetooth on Board)
- Operating Voltage: 3.3V
- Max Charging Current: 1A
- Operating Temperature: -20 to 70℃
- Processor: Xtensa® dual-core 32-bit LX7 microprocessor
- Main Frequency: 240 MHz
- SRAM: 512KB
- ROM: 384KB
- Flash: 16MB
Load more products
Loading...