Showing 73–84 of 2379 results
Shop
125KHz 13.56MHz 2-in-1 USB Proximity Sensor Smart RFID ID IC Card Reader R20DC
- Frequency of operation: 125 KHz and 13.56 MHz (2-in-1)
- Simply plug in and play with USB.
- RFID reader reading range: 0 to 8 cm.
- Supported OS: Windows 7/8/XP/Android.
- Accepts S50/S70 Cards.
- OTG Telephone Linkage.
- An identification LED and buzzer are integrated in.
125KHz RFID Card – 5Pcs.
- Data and energy supply can be transmitted contactlessly (no battery required)
- Operating distance: Depending on antenna geometry, up to 1 to 5 cm
- Frequency of operation: 125 KHz
- Transfer of data: 106 kbit/s
- Data integrity: parity, bit coding, bit counting, 16-bit CRC, and anti-collision
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12864B Graphic Blue Color Backlight LCD Display Module
- In accordance with ST7920
- Pixel resolution: 128 x 64
- 5V is the operating voltage.
- Viewing Dimensions: 40 x 72 mm
- TN/STN display mode
12mm 12V Ring Light Self-Lock Non-Momentary Metal Push-button Switch-Red Light
- Material made of stainless steel for prolonged use
- Integrated Multicoloured LED ring illumination available in a range of LED colours
- luminous daylight-colored LEDs
- Push to make and push to break functions with a single pole
- Front and back panel seals for TVS and IP67 security
- Hex nut and rubber ring for fixing, Dust- and water-resistant
12mm 5mW Red Point Laser Module CHT1230 Point Spot Size Adjustable Laser
- Type of Laser Output: Red Point Weight of the laser: 15 g.
- 650 nm wavelength
- 3–6 volts
- Minimum 2.5mW, Average 3.0mW, Maximum 5.0mW of output power
- Centre of attention The lens ring head can be used to change the intensity.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP001
- Bearing Model: KP001
- Material: Zinc Alloy
- Bearing Internal Diameter: 12mm
- Bearing Outside Diameter: 30mm
- Bearing Width: 12mm
- Mount Hole Distance: 55mm
- Net Weight: 50 gm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL001
- Model Number: KFL001
- Material: Zinc Alloy
- Inner diameter: 12mm
- Length: 62mm
- Height: 16mm
- Weight: 56gm.
12V 1 Channel Relay Module
- superior quality and brand new.
- One channel relay interface board with a high-current relay that can handle 15 amps at 125 volts or 10 amps at 250 volts
- Standard interface that microcontrollers (Arduino, 8051, AVR, PIC, DSP, and ARM) can directly control
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12V 1/2 inch Electric Water Solenoid Valve – Normally Closed NC
Specifications:
| Model | 12V DC 1/2″ Solenoid Valve |
| Rated Operating Voltage | 12V DC |
| Rated Current | 0.6A |
| Operation Mode | Normally Closed |
| Power Consumption | 8W |
| Pressure | 0.02- 0.8Mpa |
| Filtering capabilities | Removable cleaning filtration devices |
| Energized forms | Intermittent |
| Inlet and outlet Dimeter | 1/2″ (outer diameter) hose |
| Dimensions (mm) LxWxH | 80 x 88 x 50 |
| Weight (gm) | 100 |
12V 120W 3350RPM MY6812 EBIKE Brush Motor
- 12V is the voltage.
- 120W of rated power
- 0.55A is the no load current.
- Torque rate: 4.58 kg/cm (0.45 N.m)
- Current rate: < 7.0A
- >70% efficiency
- Shaft diameter: 8 mm (one-sided machined groove, 1 mm)
- Completely ball bearing constructed!
- 3350 RPM is the speed.
- Weight: 1.06Kg.
12V 150MM Stroke Length Linear Actuator 6000N 5mm/s
- Enduring magnet DC motor drive: 12VDC is the voltage
- Force of Self-Locking: 6000N
- Temperature range for operation: -20ºC to +63ºC
- Aluminium structure with an extension tube
- Small Form
- Integrated Limit Switch Low Noise Waterproof Surface
- Prolonged life: A novel carbon brush structure with a service life of over 50,000 cycles is used in the driving motor.
12V 16 Channel Relay Module with Light Coupling LM2576 Power Supply
- 12V relay with optocoupler protection and a 10A 250V AC contact capacity.
- An external power source is not required for the onboard power supply module. The I/O port driver is in low activity.
- The module can be utilised as an expanded output PLC module, appliance control, and microcontroller development board module.
- It uses the best isolation optocouplers available, with excellent jamming resistance and steady performance.
- Any full on/off road or any other road might be the 1-16 road.
- It is quite convenient to be able to connect all interfaces directly using the terminal leads.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Load more products
Loading...







Motors