Showing 853–864 of 2389 results
DIY RX5808 5.8G 40CH diversity FPV receiver with OLED display for FPV racer Quad
Original price was: ₹3,600.00.₹2,860.00Current price is: ₹2,860.00.- Automatic Search Signal Automatically swap signals between two receivers seamlessly
- Appropriate for Fast-Riding Quads
- Fit for High Definition Aerial Photography
- For both long and short distances, recommend utilising a panel connector and a clover antenna.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
DJI Naza M Lite Multi-Rotor Flight Controller without GPS
Original price was: ₹8,599.00.₹7,424.00Current price is: ₹7,424.00.- Input Voltage (V): MC: 4.8V~5.5V (recommended 2S~6S Lipoly).
- Power Consumption: MAX: 1.5W (0.3A @ 5V), Normal: 0.6W (0.12A @ 5V).
- Operating Temperature:-10°C ~ +50°C.
- Supported ESC Output: 400Hz refresh frequency
DJI NAZA V2 Power Module
Original price was: ₹6,100.00.₹5,542.00Current price is: ₹5,542.00.- Power input (V): DC 7.4-25.2 V
- BEC Output: 3A 5V.
- Suitable for Quadcopter Hexacopter Octocopter.
DOIT Mini Ultra-Small size ESP-M3 Serial WiFi Module Compatible with ESP8266
Original price was: ₹350.00.₹233.00Current price is: ₹233.00.- Derived from ESP8266, ESP8285 has a flash memory of 1MB
- Operating Voltage: 3.3V
- Totally compatible with ESP8266
- WiFi support 802.11 b/g/n/e/i
- High temperature resistant, working temperature: -40℃-125℃
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
Original price was: ₹489.00.₹430.00Current price is: ₹430.00.- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
- Path resistance: 16 mΩ at 25°C.
- Low quiescent current: 7 µA at 25°C.
Double Fans Radiator for Raspberry Pi 3B+/4B
Original price was: ₹600.00.₹425.00Current price is: ₹425.00.- Type: Raspberry 4B Aluminum Alloy Metal Heat Sink
- Material: Black Aluminum Alloy Metal
- Compatible For：Raspberry all Variant of PI 3B and 4B Model B
- Open case design with Daul Fans for Fast Heat dissipation.
- All ports and slots of the case can match with Raspberry Pi 4 Model B perfectly
Double USB Type A Female Solder Jacks Connector PCB Socket (Pack of 5)
Original price was: ₹154.00.₹121.00Current price is: ₹121.00.- Two ports stacked one on another
- Durable.
- Robust.
- Supports USB 2.0 hardware.
Drone 20A 2-4S Mini BLHeli-S OPTO ESC for FPV Race RC Helicopter
Original price was: ₹810.00.₹750.00Current price is: ₹750.00.20A model BLHeli-S Appropriate Lipo for OPTO ESC 2 to 4 S batteries
Current constant: 20A
Peak Current: 25 A (10 s)
DS18B20 Module for D1 MINI Temperature Measurement Sensor Module
Original price was: ₹209.00.₹155.00Current price is: ₹155.00.- Supporting the D1 MINI
- The Arduino Compatible, Using Arduino IDE Programming
- 11 the XI/O Pins
- 1 XADC Pin (0-3.3 – V)
- Support the OTA online
DS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
Original price was: ₹168.00.₹123.00Current price is: ₹123.00.- A temperature sensor chip (DS18B20) by fresh original installation import.
- Rust is prevented by the waterproof, moisture-proof stainless steel tube encapsulation.
- Lead length of 100 mm, stainless steel shell (6 * 45 mm) (shielding wire) employ stability
- 3.0 V to 5.5 V power supply
- Broad temperature range: -55 °C to +125 °C
- Exclusive single bus design without external components.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
DSM501A PM2.5 Dust Sensor Module for Arduino, Air-Conditioners
Original price was: ₹685.00.₹650.00Current price is: ₹650.00.Using a heating automated suction device and adjustable resistance, the DSM501A PM2.5 Dust Sensor Module can detect household dust, pollen, tobacco smoke, and house dust. To determine the precise number of particles per unit volume, the same particle counter technique is used as the basis.
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
Original price was: ₹1,800.00.₹1,610.00Current price is: ₹1,610.00.- This kit has a 2.4-inch colour TFT display screen and an ARM Cortex-M3 processor (STM32F103C8).
- vertical displacement that is movable and comes with instructions.
- It is simple to catch the moment waveform with the automatic, regular, and one-shot modes.
- A rising or falling edge trigger is available.
- Previous trigger waveform that can be observed (negative delay).
- Waveform display is capable of freezing at any moment (the HOLD function).
- Maximum Sample Rate in Real Time: 1 msps
- 12 bits of accuracy and 1024 bytes of sampling buffer depth
- Bandwidth in analogue: 0-200 KHz
