Showing 949–960 of 2389 results
Shop
ENC28J60 Ethernet Module
- Fully Compatible with 10/100/1000Base-T Networks
- Integrated MAC and 10Base-T PHY
- Supports One 10Base-T Port with Automatic Polarity Detection and Correction
- Supports Full and Half-Duplex modes
- Automatic Programmable Retransmit on Collision
- Programmable Padding and CRC Generation
- Automatic Rejection of Erroneous Packets
- SPI Interface with Clock Speeds Up to 20 MHz
- Chipboard ENC28J60/SS.
- The board 25MHZ crystal.
- The network interface board HR911105A.
- 3.3 V power supply pin.
- Stable performance.
- For Arduino, SPI, AVR, PIC, LPC, STM32.
ENC28J60 Ethernet Module(10 Pin Package: SSOP)
- ENC28J60 Ethernet Module
- HanRun HR911105A Ethernet port
- 5V supply voltage
- 100% Genuine ENC28J60 Chipset, compatible with Arduino etc.
- 25MHz Crystal.
- Standard HanRun HR911105A Ethernet Interface.
Encapsulated DC Vibration Motor, 7 mm Diameter , 25mm Length
- Encapsulated DC Vibration Motor
- Motor Color: Gold
- Motor length: 25mm
- Motor Diameter: 7mm
ENVIE® (9v Infinite) Ni-Mh 300mAh Capacity Ready to Use Rechargeable Battery
| Brand | Envie |
|---|---|
| Manufacturer | Shenzhen, China |
| Model | 9V |
| Product Dimensions | 10 x 3.3 x 14 cm; 32 Grams |
| Batteries | 1 9V batteries required. (included) |
| Item model number | 9V |
| Compatible Devices | Camera, Toy, Torch |
| Mounting Hardware | 1 No 9V Battery |
| Voltage | 9 Volts |
| Batteries Included | Yes |
| Batteries Required | Yes |
| Battery Cell Composition | NiMH |
| Battery Power Rating | 300.00 |
| Manufacturer | Shenzhen, China |
| Country of Origin | China |
| Item Weight | 32 g |
ESC Power Distribution Board Soldered XT60 Plug & 3.5mm Banana Bullet Connectors For 250mm Multicopter FPV
- Material: glass fiber
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- This has an XT60 plug to connect a battery.
- This Distribution board has 8 number of the channel to connect different ESCs with 3.5mm Banana Bullet Connectors
ESP WROOM 32 MCU Module Version: 1.1
- Ultra-low-power management.
- Version: 1.1
- 4 MB Flash.
- Current: 80 mA.
- Supply Voltage: 2.2 V ~ 3.6 V.
- Data Rate: 54 Mbps.
- Frequency: 2.4 GHz.
ESP-01 Adapter 3.3V 5V Board
- On-board level shift circuit
- Arduino UNO R3 and the compatible board can directly connect to this module;
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
- Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
- Working current: 240mA(MAX).
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
- 802.11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
ESP-12F ESP8266 Wifi Wireless IoT Board Module
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
- Flash LED off: 180mA @ 5V.
- Flash LED on to maximum brightness: 310mA @ 5V.
- Deep-sleep: 6mA @ 5V min.
- Modem-sleep: 20mA @ 5V min.
- Light-sleep: 6.7mA @ 5V min.
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
- Supports Sniffer, Station, softAP and Wi-Fi Direct modes
- Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
- Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
- Receiver sensitivity up to – 98 dBm
- UDP continues to throughput by 135 Mbps
Load more products
Loading...