-28%
![](https://ibots.in/wp-content/uploads/2024/02/z1-4-150x150.jpg)
![](https://ibots.in/wp-content/uploads/2024/02/z2-7-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/02/z3-4-150x115.webp)
Note:
Hurry and get discounts on all Raspberry Products up to 20%
IBOTS1000
₹750.00 ₹540.00
Available on backorder
Available on backorder
Free
₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹75
₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹125
₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹250
Our courier will deliver to the specified address
2-3 Days
Rs. 99
Payment Methods:
1. Order the Product and Specify the Delivery Method
2. You Will Receive an Order Confirmation Message
3. Wait for Your Order to Arrive
4. Pick up Your Order at The Checkout Area
This resistor is force-sensitive and has a 1.75 x 1.5 inch square sensing surface. Depending on the force applied to the sensing area, this FSR will change its resistance. The resistance decreases as the force increases. The FSR’s resistance will be more than 1MΩ when no force is applied to it.
Anywhere between 100g and 10kg is the range in which this Force Sensor Resistor Square 38.1mm can sense applied force. The sensor is bread-friendly since it has two 0.1-inch-pitch pins that extend from its bottom. The other side of the sensing region has a rubber backing that may be peeled and stuck to attach the FSR.
To find the force applied, just connect a resistor to create a voltage divider and measure the voltage at the junction. These sensors work well for detecting force and are easy to set up, although their accuracy isn’t very high. You might not want to use it as a scale, but you can use them to detect if it’s being squeezed.
Measurements: Total length: 3.5 inches Total width: 1.75 inches Area of sense: 1.75 x 1.5 Documents: Comments from the FSR Integrating Guide Write Your Thoughts Down.
With the use of an analogue to digital converter (ADC), this Force Sensor Resistor Square 38.1mm is readily interfaced with microcontrollers, Arduino Boards, Raspberry Pi, and other devices.
Applications:
Featutes:
Only logged in customers who have purchased this product may leave a review.
Categories
Useful Links
Useful Links
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.