Ai Thinker ESP Wifi Modules
0.91 inch I2C/IIC Serial 4-Pin OLED Display Module-WHITE
- Dimensions: 0.91 inches
- Picture size: 128 x 32
- Managing SSD1306 chip
- Display Size: 22.384 x 5.584 mm
- Voltage Required for Drive: 3-5V
- Working Temperature: -40 to 70 degrees Celsius
- Type of Interface: IIC Light White in colour
0.96 Inch I2C/IIC 4pin OLED Display Module BLUE
- Size of display: 0.96 inches
- Radio resolution: 128 x 64
- I2C/IIC interface modes
- Voltage needed for operation: 3.3V
- SSD1306 is the control chip.
0.96″ OLED Display Module – SPI/I2C – 128×64 – 7 Pin (Blue)
- SSD1306 is the driver IC.
- Resolution: 128 x 64
- >160° Visual Angle
- Voltage input: 3.3V to 6V
- Merely Require 2 I/O Port Control Pixels
- Blue in Colour
1.3 Inch 128×64 OLED Display Screen Module with SPI Serial Interface – V2
- SH1106 is the driver IC.
- Picture size: 128 x 64
- Viewing Angle: Greater than 160°
- Voltage input: 3.3V to 6V; colour: blue
2*80W+100W Bluetooth 5.0 APTX-HD TPA3116D2 Power Amplifier Board 2.1 TPA3116 PCM5102A DAC Audio NE5532 Equalizer Class D Amp
Input voltage: DC12-24V
Amp Chip: TPA3116D2
Output impedance:4~8 ohm Speaker
Current: ≥3A
Output power: 80W*2
Adopt a TPA3116D2 high-performance power amplifier chip.
With total volume, subwoofer volume, and stereo volume control knobs.
3.3V 8M Pro Mini ATMEGA328P board compatible with Arduino
- The Pro Mini Atmega328p microcontroller board is integrated with 14 digital I/O pins.
- The Pro Mini 3.3V development board features runs on a 8MHz bootloader.
- It consists of 6 PWM ports of the order D3, D5, D6, D9, D10 and D11.
- You can buy the Pro Mini Atmega328p board online at best prices
AC8265 Wireless NIC for Jetson Nano
- Supported OS: Linux, Windows 10/8.1/8/7.
- This is a dual mode wireless NIC module applicable for Jetson Nano and other motherboards ,
- Supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2.
Adafruit Accessories Electric Heating Pad – 14cm x 5cm
Features:
- Easy to Use
- Best Product for DIY-bio projects
- Power Source: 1.Computer USB Slot 2. Power Bank 3. AC to DC Adopter
- Color as per Image
- Wire Length: 6(mm)
- Size: 13 cm x 5 cm
- Brand – Adafruit
- Quantity: 1
Packages Includes:
1 x Adafruit Accessories Electric Heating Pad – 13cm x 5cm
Adafruit Circuit Playground Bluefruit – Bluetooth Low Energy
Features:
- 1 x nRF52840 Cortex M4 processor with Bluetooth Low Energy support
- 10 x mini NeoPixels, each one can display any color
- 1 x Motion sensor (LIS3DH triple-axis accelerometer with tap detection and free-fall detection)
- 1 x Temperature sensor (thermistor)
- 1 x Light sensor (phototransistor) (can also act as a color sensor and pulse sensor)
- 1 x Sound sensor (MEMS microphone)
- 1 x Mini speaker with class D amplifier (7.5mm magnetic speaker/buzzer)
- 2 x Push buttons, labeled A and B
- 1 x Slide switch
- 8 x alligator-clip friendly input/output pins
- Includes I2C, UART, 6 pins that can do analog inputs and multiple PWM outputs
- Green “ON” LED, so the user knows it is powered
- Red “#13” LED for basic blinking
- Reset button
- 2 MB of SPI Flash storage, used primarily with CircuitPython to store code and libraries
- MicroUSB port for programming and debugging
- The USB port can act like serial port, keyboard, mouse, joystick or MIDI
Package Includes:
1 x Adafruit Circuit Playground Bluefruit
Adafruit Circuit Playground Classic
Adafruit Feather M4 Express – Featuring ATSAMD51 – ATSAMD51 Cortex M4
- ATSAMD51 32-bit Cortex M4 core
- 512 KB flash, 192 KB RAM
- 3.3V regulator with 500mA peak current regulator
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
Adafruit Feather RP2040
- RP2040 32-bit Cortex M0+ dual-core running at ~125 MHz
- 8 MB SPI FLASH
- Built-in 200mA+ lipo charger
- On-board STEMMA QT / Qwiic connector
- 3.3V regulator with 500mA peak current output
- USB Type C connector
- 264kB on-chip SRAM
- 21 x Multifunction GPIO
- 3.3V regulator with 500mA peak current output
Load more products
Loading...







Motors