Drone Parts
OpenPilot CC3D EVO Flight Controller with Side Pins
- Model: CC3D EVO
- Input Voltage:5 V
- Sensors: Micro-Controller STM32, MPU6000
PDB-XT60 with BEC 5V and 12V
- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- Regulated 5V and 12V outputs
- Short circuit tolerantInput voltage range: 9 – 18V DC (3S-4S LiPoly operation)
- Output continuous current:Â 25Ax4 or 15Ax6
- Output Peak current (10 seconds/minute):Â 30Ax4 or 20Ax6
- Short-circuit tolerant:Â 5 seconds/minute
Pixhawk 2.4.7 Upgraded Flight Controller kit with GPS Module Combo Kit
Pixhawk Kit:
1 x Pixhawk V2.4.7 Flight board with Original Shell.
1 x Pixhawk PPM Encoder Module.
1 x NEO-M8N GPS Module with translucent Shell.
1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0.
1 x Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
PIXHAWK 2.4.8 Combo Kit
Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
- Supply Voltage: 7V.
- Processor: 32 Bit Cortex M4 Core
- Bus interface (UART, I2C, SPI, CAN).
- Firmware: Mission planner.
- Sensors: Gyrometer, Accelerometer, Barometer & Magnetometer
- Micro SD card to record flight data.
Pixhawk I2C Port Expand Board with Cable
- Package Weight:Â 5 gmÂ
- Number of Ports: 5.
- Board Dimensions: 33 x 12 x 6 mm(LxWxH)
- Net Weight: 3g
- Brand new and high quality
- The I2C splitter expands the I2C port to allow up to four additional peripherals to connect to Pixhawk.
Pixhawk Passive Buzzer and Switch
- The volume of about 50 dB.
- Interface: 1.25-2P plug.
- Adopts E-Switch red light switch.
- Switch mounting hole diameter 8mm.
- The same version with 3DR official version.
Pixhawk PX4 2.4.7 32Bits Flight Controller for Quadcopter Multicopter
- Processer:32bit STM32F427 Cortex M4,32-bit STM32F103
- Model: PX4
- Input Voltage:6-10 V
- RAM:256 KB
Plastic GPS Antenna Foldable Mount Holder
Shade: Black
Base Diameter: 40 mm;
Height: 130 mm
250 Quad Copter Compatibility
Plastic Landing Gear for Quadcopter
- Color: black
- Material: ABS Plastic
- Length: 200mm
- Ground Clearance: 150 mm
- Compatibility:Â Q450Â and S500 Frames
- Weight: 75 (each landing gear)
Power Distribution Board For QAV-XS 222
- Remote Control Peripherals/Devices:Â ESC
- Upgrade Parts/Accessories:Â Frame
- RC Parts & Accs:Â Motor Components
- Technical parameters:Â Value 6
- Four-wheel Drive Attributes:Â Motors
Q250 4 Axis Quadcopter Frame Kit
- Wheelbase: 250mm
- Motor Base Diameter:25 mm
- Material: Glass Fiber +Â Polyamide-Nylon
- Weight: 180 gm
- Moter Mounting Hole Dia.: 3 mm
Load more products
Loading...







Motors