Motors
Showing 1–12 of 38 results
1.8V – 12V/2A DC Motor PWM Speed Regulator
Original price was: ₹99.00.₹76.00Current price is: ₹76.00.- Supply voltage for input: DC 1.8–15 V.
- 30W is the maximum output power.
- Current output: 2 amps (max).
- with a fuse that can be reset.
- fitted with an LED light.
- Switch-equipped potentiometer for adjusting PWM.
12V 24V 36V 40A PWM DC Motor Speed Controller Forward Reverse Adjustable Knob Switch with Case
Original price was: ₹870.00.₹809.00Current price is: ₹809.00.- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Support motor: DC brush motor
12V-40V10A DC Motor PWM Speed Control Switch Governor
Original price was: ₹260.00.₹147.00Current price is: ₹147.00.- Voltage of the input supply: DC 12V–40V
- 400W is the maximum output power.
- The highest constant output current of 8 A
- 02 A static current (standby)
- Frequency of PWM: 13kHz
- Duty Cycle: 10%–100% Adaptable
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
Original price was: ₹400.00.₹350.00Current price is: ₹350.00.- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
20A Brushed Electronic Speed Controllera
Original price was: ₹508.00.₹439.00Current price is: ₹439.00.- Operating Voltage: 3 – 9VDC
- Output Current: 20A
- Battery Input: 2S Lipo
- Driver Frequency: 2KHz
298N Dual H Bridge DC/Stepper Motor Driver Controller Module
Original price was: ₹240.00.₹208.00Current price is: ₹208.00.- Driver chip: Dual H Bridge L298N
- Peak current: VMS 5V to 35V
- Supply voltage IO: Two amps per bridge
- Maximum power used: 20 watts
- Includes four LEDs to indicate the control logic’s condition.
- Every motor has its own independent direction, speed, and brakes.
A3967 Stepper Motor Driver For Arduino
Original price was: ₹589.00.₹510.00Current price is: ₹510.00.- Energy source: 7–30 volts.
- At high speeds, the torque increases with voltage.
- variable current control, 150 mA to 750 mA per phase.
- Voltage for logic: 3.3V or 5V.
- Microstepping driver A3967.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
A4988 driver Stepper Motor Driver- Good Quality
Original price was: ₹250.00.₹125.00Current price is: ₹125.00.
- Voltage of supply: 8–35 VDC.
- 0A of current (no heatsink).
- 0A of current (heat-sink included).
- Input logic: 3 to 5.5V.
- Automatic detection and selection of current decay modes.
- combined with a mode of slow current decay.
Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver – 5Pcs
Original price was: ₹49.00.₹36.00Current price is: ₹36.00.- Composition: Aluminium
- White in colour
- Number of Teeth: Five
- They are 9 x 9 x 5 (LxWxH) mm in size and feature good heat conductivity.
- Really light.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Brushless Motor Controller DC 12-36V 500W PWM Driver Board
Original price was: ₹1,380.00.₹1,151.00Current price is: ₹1,151.00.- Type of drive plate: JYQD_V6.3E2
- Range of voltage: 12–36
- Maximum current: 20 A
- PWM frequency range for speed control: 1–20 KHz
- Duty cycle: 0%–100%
- 500W or less of drive power (associated working voltage)
Cytron 10 A Switch Control Potentiometer DC Motor Driver (MD10POT)
Original price was: ₹1,299.00.₹1,140.00Current price is: ₹1,140.00.The potentiometer (10K Ohm) that comes with the box can be used to adjust the speed thanks to the MD10-POT control circuit. Analogue voltage from an external controller is not compatible with it. Two functions of the 3-way rocker switch are direction control and start/stop.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Cytron 20Amp 6V-30V DC Motor Driver MD20A
Original price was: ₹2,210.00.₹1,920.00Current price is: ₹1,920.00.- Control in both directions for a single brushed DC motor.
- Working Voltage: DC 6–30 V
- Maximum Motor Current: 60A at peak, 20A continuously
- Buttons for rapid experimentation.
- For motor output state, use LEDs.
- Active current limitation combined with overcurrent protection.
- Protection against temperature.
- Shutdown due to low voltage.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
