Showing 1–12 of 36 results
Drone Speed Controller
30 A Brushed ESC No Brake
30A brushed ESC item
Supported voltages: 4–8 V.
Proceed 30A
Peak value at instantaneous 40A
20A UBEC output in reverse: voltage of 5.7V, current of 1A.
30 A Brushed ESC with Brake
30A brushed ESC item
Supported voltages: 4–8 V.
Proceed 30A
Output voltage of UBEC: 5.7V, current of 1A.
Note:
Within India, 3 – 4 days lead time with 100% advance
For imports, 15 days lead time with 50% advance
40A 2-6S ESC
- Brand: Ready to Sky
- Model: ReadytoSky 2-6S 40A
- Continuous Current: 40A
- Burst Current (10 seconds): 60A
- Weight: 26g
5V-12V DC Brushless Driver Board Controller For Hard Drive Motor 3/4 Wire
Voltage of drive: DC 5-l2V
Work current: 1.2A or less
Range of speed: 0% to 100%
Control of phase inversion: Yes
Protection from voltage polarity: Yes
8 in1 Throttle Calibration Hub for RC Multirotor ESC Speed Controller
Send a throttle signal to as many as eight ESCs.
Adjust the throttle range to suit up to eight ESCs.
Ten grams in weight.
Ten centimetres is the length of the cable.
Bluesky Mini 5V 3A FPV Gimbal PTZ UBEC for RC Air Models
especially for transmitting FPV images
Give them a choice of two versions: 5V
Fit for: Radio Control Aircraft
Output current: 3 amps continuous
Voltage output: 2–6 S (version 5V).
Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing
Up to 48 KHz of programmable PWM frequency
Power source: 7.4–16.8V, 2–6S
Constant current: 25 A
Current at burst: 35A (5S)
Auto-timing for increased dependability and efficiency
Cyclone 45A BLHeil_S ESC
Product: BLHeil_S ESC Cyclone 45A
Voltage: Suitable for 2–6 S power sources
Current in use: 35A
Supported Dshot 125, 300, and 600 procedures
Drone 20A 2-4S Mini BLHeli-S OPTO ESC for FPV Race RC Helicopter
20A model BLHeli-S Appropriate Lipo for OPTO ESC 2 to 4 S batteries
Current constant: 20A
Peak Current: 25 A (10 s)
DYS SimonK 30A Brushless Speed Controller ESC For Drone (Quadcopter)- (Original)
DYS 30A Brushless ESC is the model.
Current Constant: 30 A.
Burst Current: 10 seconds at 40A.
BEC: 2A at 5V.
2–4S are suitable batteries.
Blue/Black in colour.
Note:
Within India, 3 – 4 days lead time with 100% advance
For imports, 15 days lead time with 50% advance
Emax BLHeli Series 12A ESC with Oneshot (Original)
12A for constant current.
The ESC is brushless.
15A is the burst current.
2-4S Lipo is the battery.
BEC: 1A at 5 V.
Oneshot 125 Protocol is supported.
Emax BLHeli Series 30A ESC with Oneshot (Original)
Model: Oneshot Emax BLHeli Series
40A for a burst current (up to 10 sec)
Maximum Input Voltage (V): 16V
Continuous Current: 30 A
BEC: 2.2A at 5V
Appropriate Batteries: 2 to 4S







Motors