125KHz 13.56MHz 2-in-1 USB Proximity Sensor Smart RFID ID IC Card Reader R20DC
Original price was: ₹1,700.00.₹1,520.00Current price is: ₹1,520.00.- Frequency of operation: 125 KHz and 13.56 MHz (2-in-1)
- Simply plug in and play with USB.
- RFID reader reading range: 0 to 8 cm.
- Supported OS: Windows 7/8/XP/Android.
- Accepts S50/S70 Cards.
- OTG Telephone Linkage.
- An identification LED and buzzer are integrated in.
125KHz RFID Card – 5Pcs.
Original price was: ₹160.00.₹129.00Current price is: ₹129.00.- Data and energy supply can be transmitted contactlessly (no battery required)
- Operating distance: Depending on antenna geometry, up to 1 to 5 cm
- Frequency of operation: 125 KHz
- Transfer of data: 106 kbit/s
- Data integrity: parity, bit coding, bit counting, 16-bit CRC, and anti-collision
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12864B Graphic Blue Color Backlight LCD Display Module
Original price was: ₹580.00.₹468.00Current price is: ₹468.00.- In accordance with ST7920
- Pixel resolution: 128 x 64
- 5V is the operating voltage.
- Viewing Dimensions: 40 x 72 mm
- TN/STN display mode
12mm 12V Ring Light Self-Lock Non-Momentary Metal Push-button Switch-Red Light
Original price was: ₹280.00.₹179.00Current price is: ₹179.00.- Material made of stainless steel for prolonged use
- Integrated Multicoloured LED ring illumination available in a range of LED colours
- luminous daylight-colored LEDs
- Push to make and push to break functions with a single pole
- Front and back panel seals for TVS and IP67 security
- Hex nut and rubber ring for fixing, Dust- and water-resistant
12mm 5mW Red Point Laser Module CHT1230 Point Spot Size Adjustable Laser
Original price was: ₹265.00.₹192.00Current price is: ₹192.00.- Type of Laser Output: Red Point Weight of the laser: 15 g.
- 650 nm wavelength
- 3–6 volts
- Minimum 2.5mW, Average 3.0mW, Maximum 5.0mW of output power
- Centre of attention The lens ring head can be used to change the intensity.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP001
Original price was: ₹210.00.₹167.00Current price is: ₹167.00.- Bearing Model: KP001
- Material: Zinc Alloy
- Bearing Internal Diameter: 12mm
- Bearing Outside Diameter: 30mm
- Bearing Width: 12mm
- Mount Hole Distance: 55mm
- Net Weight: 50 gm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL001
Original price was: ₹149.00.₹102.00Current price is: ₹102.00.- Model Number: KFL001
- Material: Zinc Alloy
- Inner diameter: 12mm
- Length: 62mm
- Height: 16mm
- Weight: 56gm.
12V 1 Channel Relay Module
Original price was: ₹121.00.₹89.00Current price is: ₹89.00.- superior quality and brand new.
- One channel relay interface board with a high-current relay that can handle 15 amps at 125 volts or 10 amps at 250 volts
- Standard interface that microcontrollers (Arduino, 8051, AVR, PIC, DSP, and ARM) can directly control
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12V 1/2 inch Electric Water Solenoid Valve – Normally Closed NC
Original price was: ₹500.00.₹475.00Current price is: ₹475.00.Specifications:
| Model | 12V DC 1/2″ Solenoid Valve |
| Rated Operating Voltage | 12V DC |
| Rated Current | 0.6A |
| Operation Mode | Normally Closed |
| Power Consumption | 8W |
| Pressure | 0.02- 0.8Mpa |
| Filtering capabilities | Removable cleaning filtration devices |
| Energized forms | Intermittent |
| Inlet and outlet Dimeter | 1/2″ (outer diameter) hose |
| Dimensions (mm) LxWxH | 80 x 88 x 50 |
| Weight (gm) | 100 |
12V 120W 3350RPM MY6812 EBIKE Brush Motor
Original price was: ₹1,999.00.₹1,610.00Current price is: ₹1,610.00.- 12V is the voltage.
- 120W of rated power
- 0.55A is the no load current.
- Torque rate: 4.58 kg/cm (0.45 N.m)
- Current rate: < 7.0A
- >70% efficiency
- Shaft diameter: 8 mm (one-sided machined groove, 1 mm)
- Completely ball bearing constructed!
- 3350 RPM is the speed.
- Weight: 1.06Kg.
12V 150MM Stroke Length Linear Actuator 6000N 5mm/s
Original price was: ₹4,900.00.₹4,810.00Current price is: ₹4,810.00.- Enduring magnet DC motor drive: 12VDC is the voltage
- Force of Self-Locking: 6000N
- Temperature range for operation: -20ºC to +63ºC
- Aluminium structure with an extension tube
- Small Form
- Integrated Limit Switch Low Noise Waterproof Surface
- Prolonged life: A novel carbon brush structure with a service life of over 50,000 cycles is used in the driving motor.
12V 16 Channel Relay Module with Light Coupling LM2576 Power Supply
Original price was: ₹690.00.₹605.00Current price is: ₹605.00.- 12V relay with optocoupler protection and a 10A 250V AC contact capacity.
- An external power source is not required for the onboard power supply module. The I/O port driver is in low activity.
- The module can be utilised as an expanded output PLC module, appliance control, and microcontroller development board module.
- It uses the best isolation optocouplers available, with excellent jamming resistance and steady performance.
- Any full on/off road or any other road might be the 1-16 road.
- It is quite convenient to be able to connect all interfaces directly using the terminal leads.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12V 3010 Cooling Fan for 3D Printer
Original price was: ₹152.00.₹106.00Current price is: ₹106.00.- Ideally suited for the extruder
- Silent Performance
- Extremely low usage of current
- Simple to connect to and install.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12V 4010 Cooling Fan for 3D Printer
Original price was: ₹109.00.₹82.00Current price is: ₹82.00.- Ideally suited for the extruder
- Silent Performance
- Extremely low usage of current
- Simple to connect to and install.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12v 40W Ceramic Cartridge Heater
Original price was: ₹150.00.₹125.00Current price is: ₹125.00.- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
12V Battery Storage Spot Welding Machine Circuit Board
Original price was: ₹1,949.00.₹1,790.00Current price is: ₹1,790.00.A well-designed 12V battery storage spot welding machine circuit board plays a critical role in ensuring accurate, reliable, and safe spot welding operations. It regulates power delivery, controls welding parameters, and incorporates safety features to protect both the circuit and the user. Understanding its components and operation is essential for efficient and effective spot welding operations.
- Supply Voltage: 12–15 V
- Welding Current: 90-130 A
- Portable&stable, reliable, and durable
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12V Cold White 5050 SMD LED Strip- 1Meter
Original price was: ₹159.00.₹110.00Current price is: ₹110.00.- Colour of LED Glow: Cold White
- Length of Strip: One Metre
- Working Voltage: DC 12 volts
- Strip width: 10 millimetres
- LED count: 60 LEDs per metre
- IP20 protection (not waterproof)
12V DC Wireless Motor Control Switch with 433MHz Keychain Remote with Forward Reverse and Stop button
Original price was: ₹1,240.00.₹1,099.00Current price is: ₹1,099.00.- Operating Voltage: 12V
- No. of a motor can be operated: 1
- Maximum operating load: 60W
- Remote control range: 20 Meters (barrier free)
- Operating Frequency: 433 MHz
