0.28inch 4.5-30V Two Wire DC Voltmeter Red

  • Voltage range for operation: 4.5–30 VDC
  • This display has two wires.
  • LED Colour: Red
  • < 15 mA is the current consumption.
  • 0.1 V is the accuracy.
  • Refresh Rate: 200 ms/s approximately.
  • Accurate measurement up to 3.6 V

Note:

  • Within India, 3 – 4 days lead time with 100% advance
  • For imports, 15 days lead time with 50% advance

IBOTS's 10th Anniversary Sale

Hurry and get discounts on all Raspberry Products up to 20%

IBOTS1000

171.00

Available on backorder

Available on backorder

  • Pick up from the IBOTS Store

Free

  • Delivery Charges: Tamil Nadu

₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹75

  • Delivery Charges: Other South India

₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹125

  • Delivery Charges: North India

₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹250

  • Courier delivery

Our courier will deliver to the specified address

2-3 Days

Rs. 99

  • Warranty 1 year
  • Free Returns Policy

Payment Methods:

1. Order the Product and Specify the Delivery Method

2. You Will Receive an Order Confirmation Message

3. Wait for Your Order to Arrive

4. Pick up Your Order at The Checkout Area

Description

This red LED-displayed digital voltmeter is small and portable. It just takes a few minutes to configure this 0.28-inch 4.5-30V Two Wire DC Voltmeter Red Panel; all you have to do is connect the wires straight to the source you want to measure and watch the LED blink!

The black wire should be connected to the negative pole and the red wire to the positive pole. Because the electric circuit has reverse polarity protection, there’s no need to worry even if there is a mismatch in the wire connections.

This voltmeter can measure voltage and has a working voltage range of 3.5 to 30 volts without the requirement for an external drive. This voltmeter will automatically adjust the decimal point’s location based on the various measuring voltages in order to achieve the highest measurement accuracy. It will display the voltage reading two places after the decimal point if it is less than 10V. It will show one place after the decimal point if the voltage is higher than 10V.

This voltmeter can be used to determine the voltage and condition of the storage battery in vehicles and motorbikes. Other voltages can also be measured using it. The maximum operational voltage of the voltmeter is 30V; thus, when operating, please allow sufficient margin to prevent irreversible damage to the voltmeter from an electrical spark, ripples in the power supply, or other very high abrupt voltage changes.

An very bright and respectable LED display is prepared to test DC voltages between 4.5 and 30 volts.

Connections :

Red Wire: source +ve terminal.

Black Wire: Source -ve terminal.

Note: The display weight and Dimensions may have ±2% error.

Features :

  1. Very small and lightweight voltmeter module.
  2. Very handy and easy to use.
  3. Red LED display.
  4. Don’t need the external power supply because it is a self-powered version of this display.
  5. Best operates in the working voltage range of 5V to 24V
  6. 100% Brand new and high quality.

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.