12V RGB 5050 SMD LED Strip- 5Meter

RGB LED Glow Colour
Length of Strip: 5 Metre
Working Voltage: DC 12 volts
Strip width: 10 millimetres
LED count: 60 LEDs per metre
IP20 protection (not waterproof)

IBOTS's 10th Anniversary Sale

Hurry and get discounts on all Raspberry Products up to 20%



  • Pick up from the IBOTS Store


  • Delivery Charges: Tamil Nadu

₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days


  • Delivery Charges: Other South India

₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days


  • Delivery Charges: North India

₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days


  • Courier delivery

Our courier will deliver to the specified address

2-3 Days

Rs. 99

  • Warranty 1 year
  • Free Returns Policy

Payment Methods:

1. Order the Product and Specify the Delivery Method

2. You Will Receive an Order Confirmation Message

3. Wait for Your Order to Arrive

4. Pick up Your Order at The Checkout Area


A single 5-meter-long, 12-volt RGB 5050 SMD LED strip has 300 bright RGB LEDs! The strip uses 22.5 Watts of power overall and is made up of 5050 Sized SMD RGB LEDs. Because of its flexibility, this RGB 5050 SMD LED strip may be twisted to fit around corners and curves. operates at 12VDC. (Controller and power supply not included.) To power this entire 5-meter strip, an adapter with a minimum output of 2 amps is required. When these strips are powered by an underpowered power supply, certain colour of the diodes won’t receive enough power, which will cause power loss and mismatched colours later on.

These strips differ slightly from conventional ones in that they have three times as many light-emitting diodes as a standard strip, despite having the same number of LED modules (300) in a different roll of warm or cold white. This is so because there are three colours in each of the 300 modules on the strip. Three LEDs: red, blue, and green. This indicates that the RGB strips require nearly three times the power of the standard white strips when they are fully brightened and set to white. RGB LEDs on a 5-meter roll require about 2.8 amps at 12 volts DC. As a result, connecting three of these strips end to end would take about 8.4 amps.


Keep in mind that these LED strips are not individually addressable. Every colour has a unique 12VDC circuit of its own. for three 12VDC circuits in total (R G B). If you do not require sophisticated flashing patterns or colour mixing, you can run these strips on standard 12V DC electricity.

The controller allows you to adjust the blinking patterns and create different hues, including trail and jump, raindrop, horse racing, and colour scanning.
Flexible is able to take on any form.
The number and length of LEDs can be customised.
Long life (more than 40,000 hours) and high brightness
Low voltage ensures user safety.

Customer Reviews

0 reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.