60V Mid drive BLDC Motor 2000W For E rickshaw

A 60V mid-drive BLDC motor rated at 2000W would offer even more power for your e-rickshaw, potentially allowing for improved acceleration and hill climbing capabilities. Here’s what you might consider:

1. Motor Selection: A 2000W motor will provide more torque and speed compared to a 1200W motor, which can be advantageous for heavier loads or challenging terrains. Ensure the motor you choose is compatible with your e-rickshaw’s requirements and design.
2. Controller: You’ll need a controller that can handle the higher power output of the 2000W motor while still providing smooth and efficient control. Look for a controller with features such as variable speed control, regenerative braking, and overcurrent protection.
3. Battery: As before, ensure your battery pack can supply the required voltage (60V) and sufficient current to power the motor. With the higher power motor, you may need a battery pack with a higher capacity to maintain adequate range between charges.
4. Drive System: The drive system will need to be robust enough to handle the increased power output of the motor. Consider components such as chains, sprockets, and bearings that can withstand the higher torque loads.
5. Mounting and Integration: Ensure the motor can be securely mounted within the e-rickshaw frame and integrated with other components such as the pedals and transmission system. Pay attention to weight distribution and overall balance to maintain stability and handling.
6. Safety Considerations: With increased power comes increased responsibility for safety. Double-check all electrical connections for proper insulation and protection, and ensure the braking system is capable of safely stopping the vehicle under various conditions.
7. Testing and Optimization: Once the motor is installed, conduct thorough testing to ensure it meets performance expectations and operates safely. You may need to fine-tune parameters such as controller settings and gear ratios to optimize performance and efficiency.

60V Mid drive BLDC Motor 2000W For E rickshaw This Full Kit includes a 60V  2000W BLDC Geared motor and a compatible E-bike controller designed to run motors up to 2000 Watts.

Mid-drive Motor 60v 2000W For E rickshaw High-Quality BLDC Motor Electric Scooter Bike Tricycle Gear Motor Electric Rickshaw Brushless Motor E-tricycle Motor This item is a brushless motor for an electric tricycle & E rickshaw.

Specification:

• Type: BLDC Motor
• Construction: Permanent Magnet
• Commutation:Brushless DC motor
• Voltage(V): 60V
• continuous torque: 1050Kg-cm
• peak torque: 1750 Kg-cm
• Continuous  Speed(RPM): 2990RPM
• peak Speed(RPM): 2370RPM
• Continuous  Output Power:1840W
• peak Output Power:3497W
• Grade of protection: IP33
• Usage:E Rickshaw / Electric Tricycle / Activa (like scooter)
• Continuous current (A): 42.2A
• peak current (A) : 124.8A

What is a mid-drive motor?

Mid-drive motors are directly attached to the drivetrain and your pedaling inputs. In most cases, the drivetrain of a chain-drive electric bike is comprised of a conventional chain, chainrings, and tape, which cooperate to drive the rear wheel and move you forward.

Mid-drive motors are known for higher performance and torque when compared to a similarly powered traditional hub motor. One key motivation behind why would that be the chain drive motor drives the crank, instead of the wheel itself, multiplying its power and allowing it to better take advantage of the bike’s existing gears.

The single biggest benefit that mid-motors have over hub motors is their gear ratio. They permit the rider to drive the back tire through something very similar chain and gear set as the pedals, which means that low stuff can be chosen for driving up steep hills or accelerating from a stop with massive torque. A mid-drive motor in low gear can climb steeper hills than a hub motor of similar power and can climb hills for longer than a hub motor, which could overheat on long steep hill climbs.

Compatible battery pack LI-ion 60V 42Ah (Note: this item is not included in this kit)