What is a hub motor eBike?
A hub drive motor is the most common type of motor you’ll see on cheaper E-bikes, with the motor integrated into the front or rear wheel.
The latter is more common, but a few e-bikes even have motors on both wheels. A hub drive directly applies torque to the wheel, operating independently of your bike’s gears. e-bike hub motor or mid-drive motor is a BLDC motor. that can’t run on DC directly, it needs a controller. The controller takes the DC and converts it into a variable frequency 3 phase AC
A hub motor commonly is planned in one of three arrangements. Considered least down to earth is a hub motion engine, where the stator windings are commonly sandwiched between sets of magnets. The other two arrangements are both radial designs with the motor magnets bonded to the rotor; in one, the inner rotation motor, the rotor sits inside the stator, as in a conventional motor. In the other, the outer-rotation motor, the rotor sits outside the stator and rotates around it. The application of hub motors in vehicular uses is still evolving, and neither configuration has become standard
This is a Hub Motor Scooter Kit 60V 1200W 10 Inch motor with the controller. This kit is very easy to mount on your 2 wheels like Activa, Jupiter, access, etc. This kit is especially Desing for Activa conversion Kit.
Hub Motor Scooter Kit 60V 1200W 10 Inch Specification:
- Â 60V 1000W ( WATERPROOF ) PURE COPPER WINDING RPM 650 approx WEIGHT APPROX 8.8 KG SILENT AND SMOOTH
- IGNITION KEY
- THROTTLE with REVERSE SWITCH
- DC TO DC CONVERTER 12V 10 AMP
- RIM size 10 inch
- rated torque: 25 – 45 newton meter
- SPEED 55-60 KM/H*
- LOADING CAPACITYÂ ( 300KG )
Note:
MINIMUM BATTERY CAPACITY REQUIRED 60V 42AH as below we have (BATTERY NOT INCLUDING)
Reviews
Clear filtersThere are no reviews yet.