MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable

CNC 5-Axis MACH3 Interface Board with the most recent Optocoupler update A five-axis breakout board is specifically made for the CNC single-axis 2-phase stepper driver controller series, which includes the TB6560, M542, M542H, MA860H, 2M542, 2M982, DM542(A), DM860(A), and so on. Any 1–5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc., with the help of this 5-axis breakout board.

Follow the control spindle switch all the way to the relay output port. P17 mouth output port.

Spindle speed can be regulated using the matching analogue interface converter to regulate the optocoupler isolated 0-10V analogue voltage output. Port P1 for output By opening all 17 of the ports that the optocoupler drive can access, a 5-axis stepper motor may be controlled. P1 can be regulated using the optocoupler input spindle governor as its PWM outputs. This can be connected to a 5V drive via a common cathode or common anode input level.

Note: The cable is available in 2 colors, black and white, which will be shipped randomly.

Features :

1. Maximum support 5-axis stepper motor driver controllers
2. Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
3. USB power supply and peripherals power phase are separate to protect computer security.
4. All the signals are to-isolate which can protect your computer security.
5. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
6. Wide input voltage range: 12-24V, and with anti-reverse function.
7. One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
8. Output 0-10V analog voltage for the inverter to control the spindle speed.
9. All the way to the relay output port, control spindle switch. Output port P17 mouth.
10. Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
11. Pin P1 as PWM outputs can be controlled with optocoupler input spindle governor.
12. Can be accessed by a common cathode or common anode input level to 5V drive.
13. All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.