Naze 32 Full REV6 Flight Controller with Compass & Barometer

The most recent iteration of Abuse Mark’s well-liked Full Naze32 flight controller board, made in Japan, is the Naze 32 Full REV6 Flight Controller with Compass & Barometer. A 32-bit ST micro workhorse processor with untapped memory and CPU capability, along with a slew of equally outstanding sensors, power the Naze32. The best GUI applications are also paired with the Naze. additional features to maximise your configuration’s potential.

This multirotor flight controller is fantastic. This “Full” version is identical to the Acro Naze32 board, except it has a magnetometer and an MS5611 barometer, which are features not found in the Acro version. If you want to use GPS features like hold, speed indication via telemetry or OSD, heading and altitude information in an on-screen display, and coordinates, RTH arrow, and return to home, you should use this flight controller.

It’s fantastic that all revision 6 boards have a built-in black box flight data recorder. The 16Mbit onboard SPI flash is found on the 6DOF, Acro, and 10 DOF naze boards. You can keep more flight records on the entire board, though, because the Full version comes with 128Mbit of onboard SPI flash.
These are NOT soldered to the board; instead, they have pin headers (available in straight and right angles).

Qualities:
3-axis MEMS gyro with accelerometer and 2000 degrees per second (MPU6500)
Maximum input rail voltage of 16 volts and maximum input line voltage of 35 volts for six seconds
Right side USB
PPM/PWM input on standard-size headers as through-hole 3.3V, I2C
Complete pinout compatibility with rev5 add-ons, such as OSDoge
Satellite SBUS Inverter Spectrum
Sonar pads with additional resistors added for a straight 5V sonar connection
A5 and all other pads on top, sonar just on the bottom, MS5611 barometer 128 mbit flash