Virtual VRS52H-S-DC5V-C Relay

VRS52H-S-DC5V-C Virtual Isolated switching step-down power supply module with a plastic enclosure and relay. At 120V AC to 230V AC, it can supply 5V DC. Its power rating is 3 Watt. Because of this, it’s ideal for modest tasks requiring a 5 volt mains supply. These relays have several benefits, including minimal temperature increase, low power consumption, high reliability, high efficiency, and excellent security isolation. It finds extensive application in automation and control, instrumentation, communication equipment, smart homes, and other industries.

This relay is of the DPDT variety. Before attaching the load, multimeter testing is required to verify the pins as they may differ depending on the manufacturer.

Multimeter testing:

1. Measure pins A and B’s resistance. The pins are relay coil pins if the resistance value is displayed.

2. Verify NC, NO, and Common by checking the continuity of other pins.

Features and Specifications:

• All input voltage (AC: 90 ~ 264V)
• Minimal noise and ripple
• Protection against short circuit and output overload
• Elevated efficacy and power density
• The product is made to comply with EMC and Safety Test regulations.
• Environmental protection, low power consumption, and no load loss of less than 0.1 watts
• Warmth Range for Operation: -20 to +60°C
• Store at between -40 and +80°C.
• 5 to 95% relative humidity
• Maximum input voltage range: 100-240V
• <2A is the maximum input current.
• Surge in input current: <10A
• 270VAc is the maximum input voltage.
• Enter Data Vin = 110VAc, low voltage efficiency; output at full load: 69%
• Vin=220VAc for input high voltage efficiency, and 70% for output full load
• Long-term dependability: 100000h MTBF