Showing 1–12 of 4075 results
Shop
(L298N mini) MX1508 DC Motor Driver Module PWM Speed Dual H-Bridge Stepper Motor
- Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor.
- The module supply voltage 2V-10V.
- Signal input voltage 1.8-7V
[Type 1] 2 Channel 315 Mhz RF Transmitter Remote Module with Antenna
0 to 600 Deg C Surface Thermocouple K Type High Temperature Resistance Probe
0.01 Ohm 3W SMD2512 Surface Mount Sense Resistor (Pack of 3)
- 0.01 Ω of resistance
- SMD2512 is the package number.
- 3 W of power
- Three resistors in a pack
0.1-1.0mm Mixed 3D Printer Nozzle Cleaning Drill Bit Kit for MK7 MK8RepRap 10Pcs
- 38 mm in total length
- Diameter of Shank: 3.17 mm
- Size: about 0.1 mm to 1 mm
- Any owner of a 3D printer has to have one of these powerful instruments, nozzle drill cleaners.
- Nozzles need to be cleaned to maintain flowing printing because blocks occur frequently during printing.
0.1-2000mhz RF Wideband Amplifier Gain 30db Low-Noise Amplifier LNA Board Module
Operating frequency: 0.1-2000MHz
Amplifier gain:
F=0.1MHz, gain=32dB
F=500Mhz, gain=31dB
F=1000MHz, gain=29dB
F=1500Mhz, gain=25dB
F=2000MHz, gain=20dB
0.15 x 7 x 100 mm 99.96%Pure Nickel Strip for Battery Connection Welding-50Pcs.
- Measurements: 100 x 8 x 0.15 mm.
- Nickel content: >/=99.96%.
- Elevated Tensile Strength.
- Minimal Resistance.
- Beneficial for welding battery points.
0.1MM Copper Soldering Solder PPA Enamelled Repair Reel Wire
- Wire Diameter: 0.1 mm.
- Length: about 15m
- Color: Copper
- Melting point: 361 ° F / 183 ° C
- Material: Copper / Copper Alloy
- Spool Size: 3.1cm x 3.1cm x 1.9cm.
- It can be used to connect Fly line(Jump wire) for computer and mobile phone motherboard repair.
- No need to remove the lacquer, welding directly.
0.28 Inch 0-100V Three Wire DC Voltmeter Blue
- Measuring Range (V): 0 to 100 VDC
- It is a 3-wire display.
- LED Color: BLUE
- Current Consumption : < 20 mA.
- Accuracy: 0.1 V.
- Refresh Speed : Approx 200mS/time.
- Measure accurately up to 3.6 V
0.28 inch DC 100V 100A LED Digital Ammeter-Voltmeter With Shunt
- 5V DC is the operating voltage.
- Usage Right Now: <60mA
- Voltage to Test: 0-100V
- 1-100A is the testing current.
- Simple to read in low light
0.28 inch Digital Voltmeter Ammeter DC 100V 50A LED Amp Volt Meter With Shunt
- Working Voltage: DC 5 volts
- Usage Right Now: <60mA
- Voltage to Test: 0-100V
- 1-50A is the testing current.
- Simple to read in low light
0.28″ 5 Wires Red Led Digital Dual DC 100V 100A Voltmeter Ammeter Without Shunt
Working Voltage: DC 5 volts
Usage Right Now: <60mA
Voltage to Test: 0-100V
1-100A is the testing current.
Simple to read in low light
Load more products
Loading...







Motors