Showing 1357–1368 of 2373 results
M5 X 10 mm Female-Female Brass Hex Threaded Pillar Standoff Spacer-12 Pcs.
Original price was: ₹560.50.₹402.38Current price is: ₹402.38. (Incl. GST)- Versatile and easy to fit.
- Lock PCB securely into place.
- Hexagonal design allows tightening with a wrench.
- The brass metal itself provides good resistance to oxidation and corrosion.
M5 X 4 mm Brass Heat set Threaded Round Insert Nut – 25 Pcs.
Original price was: ₹315.06.₹224.20Current price is: ₹224.20. (Incl. GST)The Heat Set Threaded Round Insert Nut is intended for use with heat during post-mould installation into thermoplastics that are notch-sensitive. It has extremely high torque resistance and pull-out.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
M5STACK ESP32 PSRAM Timer Camera (OV3660)
Original price was: ₹2,419.00.₹2,159.40Current price is: ₹2,159.40. (Incl. GST)- Product: M5STACK ESP32 PSRAM Timer Camera
- PSRAM: 8MB
- Flash: 4M
- Image Sensor: OV3660
- Maximum resolution: 3M pixels
M5STACK RGB LED Unit
Original price was: ₹683.22.₹588.82Current price is: ₹588.82. (Incl. GST)- Program Platform: Arduino, UIFlow(Blockly, Python)
- Two Lego-compatible holes
M7 50V 1A Surface Mount Rectifier Diode (Pack of 30)
Original price was: ₹103.84.₹69.62Current price is: ₹69.62. (Incl. GST)- Maximum Voltage (V) for Repeated Peak Reversal
- RMS Voltage Maximum (V): 700
- The highest possible average forward rectified current (A) is 1.
- Junction Operation Degree Celsius: -55 to +125
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
Original price was: ₹566.40.₹470.82Current price is: ₹470.82. (Incl. GST)- Compatible with parallel-control CNC software such as MACH3, Linux CNC (EMC2), etc.
- To safeguard computer security, the power phase of peripherals and the USB power source are independent.
- Since each signal is to-isolate, your computer’s security may be maintained.
- To specify the Limit, Emergence-Stop, Cutter alignment, etc., use the 5-input interface.
- With anti-reverse functionality and a broad input voltage range of 12–24 V.
- A single relay output control interface that can be accessed by the water pump, air pump, spindle motor, etc.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
MACH3 V2.0 Engraving Machine Motherboard CNC 5- Axis+USB Cable+CD
Original price was: ₹2,512.22.₹2,218.40Current price is: ₹2,218.40. (Incl. GST)- Sort: Interface Board USB
- Weight: 145g
- Dimensions: 9.8 x 6cm / 3.96 x 2.36in
- Support: for MACH3 software
Magnetic Micro Coreless Motor for Micro Quadcopters (Model-8520)
Original price was: ₹177.00.₹147.50Current price is: ₹147.50. (Incl. GST)- Model: 8520
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Rated RPM: 4500~48000±10%.
- Wire Length: 6cm
Male + Female 2.1*5.5mm for DC Power Jack Adapter Connector Plug For CCTV Camera
Original price was: ₹64.90.₹46.02Current price is: ₹46.02. (Incl. GST)- It is a perfect solution for those who want to make custom power cable.
- This CCTV Camera DC Power Connector will provide a great connection.
- The internal diameter of the plug: 2.1mm
- The external diameter of the plug: 5.5mm
Mamba F4 pro V2 flight controller
Original price was: ₹4,696.40.₹3,715.82Current price is: ₹3,715.82. (Incl. GST)- Model: Mamba F4 pro V2
- Input voltage: 2 – 6s LiPo support
- Gyroscope: MPU6000 (reserved external gyroscope interface)
- Firmware: BetaFlihgt 3.2.0 OMNIBUSF4SD
- Support Receiver: PPM, SBUS, IBUS, DSM2/DSMX Receiver (UART1)
- Integrated with OSD, support BF Ground Station adjust OSD
- Adjust the PID by OSD by remote control
Mark4 5 inch 225mm carbon fiber frame kit
Original price was: ₹3,420.82.₹2,476.82Current price is: ₹2,476.82. (Incl. GST)- Model: MARK4
- Wheelbase: 225mm
- Material: Full Carbon Fiber
- Arm Thickness:5 mm
- Weight: 130 gmd
MARK5 5inch 225mm FPV Carbon Fiber Frame blue
Original price was: ₹10,060.68.₹7,726.64Current price is: ₹7,726.64. (Incl. GST)- Product: FPV Carbon Fiber Frame blue
- Material: Carbon Fiber
- Total Product: 229g
- Product Type: DIY Frame Kit
- Easy to assemble kit
