Showing 1369–1380 of 4073 results
Shop
DFRobot Gravity I2C Oxygen Sensor
- Detection of Gas: oxygen
- Operating Voltage: 3.3 to 5.5V DC
- Output Signal: I2C output
- Measurement Range: 0~25%Vol
DFRobot Gravity Lab Grade Analog ORP Sensor Meter For Arduino
- Product: DFRobot Gravity Lab Grade Analog ORP Sensor
- Module Power: +5.00V
- Measuring Range:- 2000mV—2000mV
- Suitable Temperature: 5-70℃
- Accuracy:±10mv (25 ℃) FOR BULK B2B ENQURIES MAIL US @ibots.in
DFRobot Gravity SGP40 Air Quality Sensor
- Power Supply: 3.3V~5V
- Operating Current: 2.6mA
- Preheat Time: 10S
- Response Time: 2S
- Communication: I2C
DFRobot Gravity: I2C Ozone Sensor (0-10ppm)
- Detection Gas: Ozone
- Working Voltage: 3.3 ~ 5.5V DC
- Interface: Gravity-4Pin
- Output Signal: I2C output
- Measuring Range: 0 ~ 10ppm
- Resolution: 0.01ppm (10ppb)
- Warm-up Time: ≤3 minutes
- Response Time: ≤90 seconds
- Recovery Time: ≤90 seconds
- Working Temperature: -20 ~ 50 ℃
- Operating Humidity: 15 ~ 95% RH (non-condensing)
DFRobot Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) – I2C – MiCS-4514
- Operating Voltage: 3.3~5.5V DC
- Power Dissipation: 0.45W(5V)
- Output Signal: I2C (0~3V)
- Working Temperature: -30~85℃
- Working Humidity: 5~95% RH(No condensation)
- Storage Temperature: -40~85℃
- Lifespan: >2 years (in the air)
- Circuit Board Size: 27mm* 37mm
- Mounting Hole Size: inner diameter 3.1mm/ outer diameter 6mm
DHT-11 Temperature And Humidity Sensor Module with Cable
- Power Supply: 3.3~5.5V DC
- Output: 4 pin single row
- Measurement Range: Humidity 20-90%RH, Temperature 0~50℃
- Accuracy: Humidity +-5%RH, Temperature +-2℃
- Resolution: Humidity 1%RH, Temperature 1℃
- Interchangeability: Fully Interchangeable
DIFFERENTIAL AXLE BOLT HEAVY
The “differential axle bolt heavy” is a robust bolt used to secure the differential to the axle housing in a vehicle’s drivetrain system. It’s designed to withstand high torque and stress, ensuring the differential remains securely attached, crucial for proper vehicle operation.
Diffused RGB Common Anode LED – 10mm Tricolor (5pcs)
- Diameter of 10 mm
- Green: 523 nm, Blue: 467 nm, and Red: 623 nm in wavelength
- At a current of 20 milliamperes, forward voltage: Green: 3.0-3.4V, Blue: 3.0-3.4V, and Red: 1.8-2.2V
- A 50-degree angle of view
Digi XBee3 2.4GHz ZB3.0 PCB Antenna
- Serial Data Interface: Uart, Spi, I2c.
- Configuration Method: API Or At Commands, Local Or Over-the-air.
- Frequency Band: ISM 2.4 GHz.
- Form Factor: Micro, Through-hole, Surface Mount.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs.
- Digital I/o: 15. FIR BULK B2B ENQUIRIES MAIL US @ibots.in
Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna
- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Configuration Method: API Or At Commands, Local Or Over-the-air
- Frequency Band: ISM 2.4 GHz
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15.
DigiKey Zigbee 3.0 Module?XB3-24Z8CM –
- Supports Zigbee 3.0 Protocol
- Compact Size and Low-Power Module
- Comes in SMD Package
- Easy-to-Add Connectivity in a Compact Space
Digilent Pmod HAT Adapter: Pmod Expansion for Raspberry Pi
- Enables use of up to three Pmods at a time
- Supports SPI, UART, I2C, and GPIO connections
- Optionally powered through a 5V barrel jack
Load more products
Loading...