Showing 1369–1380 of 4062 results
Shop
DFRobot Gravity I2C LIS2DW12 Triple Axis Accelerometer Sensor (?2g/?4g/?8g/?16g)
- Useful Voltage: 3.3V to 5V
- 8–10 uA of operating current
- Interface: I2C-gravity
- I2C Address: 0x18 (optional) / 0x19 (default)
- User-chosen Metrics: ±2g, ±4g, ±8g, ±16g
- Operating temperature range: -40°C to +85°C
DFRobot Gravity I2C Oxygen Sensor
- Detection of Gas: oxygen
- Operating Voltage: 3.3 to 5.5V DC
- Output Signal: I2C output
- Measurement Range: 0~25%Vol
DFRobot Gravity Lab Grade Analog ORP Sensor Meter For Arduino
- Product: DFRobot Gravity Lab Grade Analog ORP Sensor
- Module Power: +5.00V
- Measuring Range:- 2000mV—2000mV
- Suitable Temperature: 5-70℃
- Accuracy:±10mv (25 ℃) FOR BULK B2B ENQURIES MAIL US @ibots.in
DFRobot Gravity SGP40 Air Quality Sensor
- Power Supply: 3.3V~5V
- Operating Current: 2.6mA
- Preheat Time: 10S
- Response Time: 2S
- Communication: I2C
DFRobot Gravity: I2C Ozone Sensor (0-10ppm)
- Detection Gas: Ozone
- Working Voltage: 3.3 ~ 5.5V DC
- Interface: Gravity-4Pin
- Output Signal: I2C output
- Measuring Range: 0 ~ 10ppm
- Resolution: 0.01ppm (10ppb)
- Warm-up Time: ≤3 minutes
- Response Time: ≤90 seconds
- Recovery Time: ≤90 seconds
- Working Temperature: -20 ~ 50 ℃
- Operating Humidity: 15 ~ 95% RH (non-condensing)
DFRobot Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) – I2C – MiCS-4514
- Operating Voltage: 3.3~5.5V DC
- Power Dissipation: 0.45W(5V)
- Output Signal: I2C (0~3V)
- Working Temperature: -30~85℃
- Working Humidity: 5~95% RH(No condensation)
- Storage Temperature: -40~85℃
- Lifespan: >2 years (in the air)
- Circuit Board Size: 27mm* 37mm
- Mounting Hole Size: inner diameter 3.1mm/ outer diameter 6mm
DHT-11 Temperature And Humidity Sensor Module with Cable
- Power Supply: 3.3~5.5V DC
- Output: 4 pin single row
- Measurement Range: Humidity 20-90%RH, Temperature 0~50℃
- Accuracy: Humidity +-5%RH, Temperature +-2℃
- Resolution: Humidity 1%RH, Temperature 1℃
- Interchangeability: Fully Interchangeable
DHT22 Humidity and Temperature Sensor Module (AM2302)
The DHT22 (AM2302) is a digital temperature and humidity sensor that provides accurate environmental readings through a single data pin. It measures temperatures from -40°C to +80°C and relative humidity from 0–99.9% RH. Compatible with Arduino, ESP32, and ESP8266 projects, it is ideal for IoT applications, weather stations, smart home automation, and environmental monitoring.
DIFFERENTIAL AXLE BOLT HEAVY
The “differential axle bolt heavy” is a robust bolt used to secure the differential to the axle housing in a vehicle’s drivetrain system. It’s designed to withstand high torque and stress, ensuring the differential remains securely attached, crucial for proper vehicle operation.
Diffused RGB Common Anode LED – 10mm Tricolor (5pcs)
- Diameter of 10 mm
- Green: 523 nm, Blue: 467 nm, and Red: 623 nm in wavelength
- At a current of 20 milliamperes, forward voltage: Green: 3.0-3.4V, Blue: 3.0-3.4V, and Red: 1.8-2.2V
- A 50-degree angle of view
Digi XBee3 2.4GHz ZB3.0 PCB Antenna
- Serial Data Interface: Uart, Spi, I2c.
- Configuration Method: API Or At Commands, Local Or Over-the-air.
- Frequency Band: ISM 2.4 GHz.
- Form Factor: Micro, Through-hole, Surface Mount.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs.
- Digital I/o: 15. FIR BULK B2B ENQUIRIES MAIL US @ibots.in
Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna
- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Configuration Method: API Or At Commands, Local Or Over-the-air
- Frequency Band: ISM 2.4 GHz
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15.
Load more products
Loading...