Showing 1417–1428 of 4073 results
Shop
DPDT Slide Switch 6 Pin
- Length: 25mm
- Width: 6mm
- Terminal Pitch: 4mm
- Voltage: 50V
- Current: 0.5A
Drone 20A 2-4S Mini BLHeli-S OPTO ESC for FPV Race RC Helicopter
20A model BLHeli-S Appropriate Lipo for OPTO ESC 2 to 4 S batteries
Current constant: 20A
Peak Current: 25 A (10 s)
Drone remote control joystick
- Material: Aluminum alloy
- Applicable models: for Mavic Air/Mavic Mini/, Mavic 2 Pro Zoom.
- Colour: Black, Red
- Net weight: 3.6g (1 pair)
- Product size: 2*1cm (single)
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
DRV8833 2 Channel DC Motor Driver
- One bipolar stepper motor or two DC motors can be driven by a dual-H-bridge motor driver.
- Voltage range for operation: 2.7 V to 10.8 V
- Output current for each motor is 1.2 A constant (2 A peak).
- There are 3V and 5V compatible inputs.
DS1302 Real Time Clock (RTC) Module without battery
Specifications
- Crystal 32.768KHz, matching capacitance 6pF
- DS1302 8-pin SMD homemade chips
- Seconds, Minutes, Hours, Day of Month, Day of Week, and Year
DS1302 Real Time Clock Module (with Battery)
- Crystal 32.768KHz, matching capacitance 6pF
- DS1302 8-pin SMD homemade chips
- Seconds, Minutes, Hours, Day of Month, Day of Week, and Year
- Operating temperature: 0 degree — 70 degree FOR BULK B2B ENQURIES MAIL US @ibots.in
DS18B20 IP67 Thermal Probe with 3.5mm Audio Jack
- Power supply range: 3.0V – 5.5V
- Operating temperature range:-55°C to +125°C (-67F to +257F)
- Storage temperature range:-55°CC to +125°C (-67F to +257F)
- Accuracy over the range of -10°C to +85°C:±0.5°C
- Waterproof Stainless steel sheath
- Size of Sheath:6*50mm or customize
DS18B20 Module for D1 MINI Temperature Measurement Sensor Module
- Supporting the D1 MINI
- The Arduino Compatible, Using Arduino IDE Programming
- 11 the XI/O Pins
- 1 XADC Pin (0-3.3 – V)
- Support the OTA online
DS18B20 Temperature Sensor Module
- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.
DS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
- A temperature sensor chip (DS18B20) by fresh original installation import.
- Rust is prevented by the waterproof, moisture-proof stainless steel tube encapsulation.
- Lead length of 100 mm, stainless steel shell (6 * 45 mm) (shielding wire) employ stability
- 3.0 V to 5.5 V power supply
- Broad temperature range: -55 °C to +125 °C
- Exclusive single bus design without external components.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
DS3231 RTC Module Precise Real Time Clock I2C – AT24C02
Features:
- Accuracy 2 ppm from 0° C to +40° C
- Accuracy 3.5 ppm from -40° C to +85° C
- Digital Temp Sensor Output: ±3° C Accuracy
- Memory Chips: AT24C02 (2Kbit)
- Register for Aging Trim
- RST Output/Pushbutton Reset Debounce Input
- Two Time-of-Day Alarms
- Programmable Square-Wave Output Signal
- Fast 400 Khz I2C interface
Load more products
Loading...