Motors
Showing 133–144 of 4075 results
12mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP001
Original price was: ₹210.00.₹167.00Current price is: ₹167.00.- Bearing Model: KP001
- Material: Zinc Alloy
- Bearing Internal Diameter: 12mm
- Bearing Outside Diameter: 30mm
- Bearing Width: 12mm
- Mount Hole Distance: 55mm
- Net Weight: 50 gm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)
Original price was: ₹110.00.₹75.00Current price is: ₹75.00.- 12 mm in diameter
- Two pins in total.
- Mounting style: PCB Through Hole
- The maximum operating temperature is around +70ËšC.
- Resistance to dark: 1–20 MΩ
- Peak spectrum: 560 nm
- Maximum DC voltage is 250 V.
- 200 mW maximum wattage
- Ten Lux light resistance: 10–20 KΩ
- 2 MΩ of dark resistance
- Illumination resistance: three
- 20 ms for rise and 30 ms for fall in response times.
12mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL001
Original price was: ₹149.00.₹102.00Current price is: ₹102.00.- Model Number: KFL001
- Material: Zinc Alloy
- Inner diameter: 12mm
- Length: 62mm
- Height: 16mm
- Weight: 56gm.
12V 1 Channel Relay Module
Original price was: ₹121.00.₹89.00Current price is: ₹89.00.- superior quality and brand new.
- One channel relay interface board with a high-current relay that can handle 15 amps at 125 volts or 10 amps at 250 volts
- Standard interface that microcontrollers (Arduino, 8051, AVR, PIC, DSP, and ARM) can directly control
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12V 1-Way Tracing Sensor Relay Module
Original price was: ₹499.00.₹449.00Current price is: ₹449.00.- Operating Voltage: 12V DC
- Measuring obstacle distance within 0 – 3 CM.
- Power Supply 3.3V – 5V
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Mounting holes provided
12V 1/2 inch Electric Water Solenoid Valve – Normally Closed NC
Original price was: ₹500.00.₹475.00Current price is: ₹475.00.Specifications:
| Model | 12V DC 1/2″ Solenoid Valve |
| Rated Operating Voltage | 12V DC |
| Rated Current | 0.6A |
| Operation Mode | Normally Closed |
| Power Consumption | 8W |
| Pressure | 0.02- 0.8Mpa |
| Filtering capabilities | Removable cleaning filtration devices |
| Energized forms | Intermittent |
| Inlet and outlet Dimeter | 1/2″ (outer diameter) hose |
| Dimensions (mm) LxWxH | 80 x 88 x 50 |
| Weight (gm) | 100 |
12V 120W 3350RPM MY6812 EBIKE Brush Motor
Original price was: ₹1,999.00.₹1,610.00Current price is: ₹1,610.00.- 12V is the voltage.
- 120W of rated power
- 0.55A is the no load current.
- Torque rate: 4.58 kg/cm (0.45 N.m)
- Current rate: < 7.0A
- >70% efficiency
- Shaft diameter: 8 mm (one-sided machined groove, 1 mm)
- Completely ball bearing constructed!
- 3350 RPM is the speed.
- Weight: 1.06Kg.
12V 150MM Stroke Length Linear Actuator 6000N 5mm/s
Original price was: ₹4,900.00.₹4,810.00Current price is: ₹4,810.00.- Enduring magnet DC motor drive: 12VDC is the voltage
- Force of Self-Locking: 6000N
- Temperature range for operation: -20ºC to +63ºC
- Aluminium structure with an extension tube
- Small Form
- Integrated Limit Switch Low Noise Waterproof Surface
- Prolonged life: A novel carbon brush structure with a service life of over 50,000 cycles is used in the driving motor.
12V 150W 2750RPM MY6812 Ebike Brush motor
Original price was: ₹2,850.00.₹2,149.00Current price is: ₹2,149.00.- #25 chain sprocket with nine teeth
- RPM when loaded: 2600–3000
- 70% efficiency
- 1.4 kg in weight
12V 16 Channel Relay Module with Light Coupling LM2576 Power Supply
Original price was: ₹690.00.₹605.00Current price is: ₹605.00.- 12V relay with optocoupler protection and a 10A 250V AC contact capacity.
- An external power source is not required for the onboard power supply module. The I/O port driver is in low activity.
- The module can be utilised as an expanded output PLC module, appliance control, and microcontroller development board module.
- It uses the best isolation optocouplers available, with excellent jamming resistance and steady performance.
- Any full on/off road or any other road might be the 1-16 road.
- It is quite convenient to be able to connect all interfaces directly using the terminal leads.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12V 24V 36V 40A PWM DC Motor Speed Controller Forward Reverse Adjustable Knob Switch with Case
Original price was: ₹870.00.₹809.00Current price is: ₹809.00.- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Support motor: DC brush motor
12V 250W MY6812 EBIKE Brush Controller
Original price was: ₹830.00.₹620.00Current price is: ₹620.00.
- Superior merchandise
- 12 volts is the rated voltage.
- 250 W of rated power
- SENSITIVE CONTROL: This brushed motor controller has the ability to regulate speed consistently and brake and change direction with precision.
- PREMIUM MATERIAL: Constructed from an aluminium alloy, this brushed controller is robust and long-lasting, fitting a broad range of e-bikes and scooters.
