Showing 1489–1500 of 2404 results
Shop
NANO IO Shield Expansion Board For Arduino Screw Terminals
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size.
- Leads all pins out, convenient for wiring and doing experiments.
- Dimensions: 53 x 36 x 12 (LxWxH) mm.
- Weight: 22 gm.
Nano R3 W/O USB Cable Compatible with Arduino (Soldered)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel MEGA328PB-U (Nano)
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Naze 32 Full REV6 Flight Controller with Compass & Barometer
- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500).
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Fully pinout compatible with rev5 accessories (OSDoge etc).
- SBUS Inverter.
- Sonar pads w/resistors added for direct connection to 5V sonar.
- MS5611 barometer.
- 128mbit flash.
Naze32 10DOF Flight Control Board
Updating or flashing the default firmware could result in a laptop or PC connectivity issue.
This board’s magnetometer is only compatible with Clean Flite Version V1.2.3.
Since this flight controller board is open source, it is supplied by numerous vendors. We have selected and evaluated the highest calibre items available on the market. and ultimately chose the greatest one out of them. Our product functions precisely as we have shown in the description up there.
Naze32 6DOF Flight Control board
- Version: 6 DOF.
- Battery voltage monitoring.
- Built-in FrSky telemetry converter.
- Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz.
- Onboard USB for setup and configuration.
- Modern GUI for all operating systems, Baseflight Configurator.
NAZE32 Receiver Cable
This is a breakout cable for the Naze32 flight controller
This cable specially designed for open source flight controller such as Naze32 to connect with a radio receiver.
NE555 + CD4017 Water Flowing Light LED Module DIY Kit
Specifications and Features:
- Chip: NE555, CD4017.
- LED Quantity: 10pcs.
- LED Color: Red.
- Voltage: 2.5V 14.5V.
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V
- Module based on the NE555 chip.
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- Max. load: 2200W
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupler
- Timing ranging from hours to microseconds.
- Simple design of circuits.
- Accurate Pulse Production / Timing.
- Duty Cycle Adjustment.
- Single-Static Process.
- Voltage (V) of supply: 12
- Modifiable Period(s): 0–10 AC Voltage (V) of control: 0-250 @ maximum 10A
- DC Control Voltage (V): max. 10A, 0–30
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator
- Core chip: NE555
- Enter Data DC voltage range: 5–15 volts.
- Create a pulse that the MCU can alter.
- Create a tunable pulse to regulate the related circuitry.
NEMA17 4.2 kg-cm Stepper Motor
- Step Angle: 1.8°.
- Current: 1.7 A /Phase.
- Holding Torque: 4.2 kg-cm.
- Voltage: 12~24VDC
- No of Leads: 4.
- Weight: 288 grams.
NEMA17 PR42HS8401S Stepper Motor-D Type Shaft
- Step Angle: 1.8 °
- 2.5 A/Phase Current
- Holding Torque: 4.8 kg-cm
- Lead Wires: 4
- Shaft Type: D-type
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Load more products
Loading...