Showing 1597–1608 of 2373 results
Shop
Original Arduino Mega 2560 ATmega2560 MCU Rev3 A000067
- Manufacturer: Arduino Official
- Official Arduino Board with 3-Month brand Warranty
- ATmega16U2 instead 8U2 as USB to serial converter
- Stronger RESET circuit
- 5V operating voltage
- 40mA DC current per I/O pin
- 256KB flash memory of which 8KB used by bootloader
- 8KB SRAM
- 4KB EEPROM
Original Arduino Nano 33 BLE Sense Rev2 ABX00069
- Processor: nRF52840 (datasheet)
- Microcontroller: nRF52840
- Security: ECC608 crypto chip
- Flash: 1MB
- RAM: 256KB
- Circuit voltage 3.3V
- Sensors onboard: digital microphone, 6-axis accelerometer, pressure humidity, temperature, gesture recognition.
Original Arduino Nano A000005
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Original Arduino Nano Every ABX00028
- Manufacturer: Arduino
-
MCU: ATMega4809
-
Clock Speed: 20MHz
-
Flash: 48KB
-
EEPROM: 256byte
-
SRAM: 6KB
Original Arduino Uno Rev3 SMD A000073
- 14 digital inputs/outputs, including 6 PWM inputs
- 6 analog inputs
- 1 ICSP connector
- 1 revised and corrected reset circuit
Original JHD 16×1 Character LCD Display With Yellow Backlight
- Model: JHD651 Y/YG
- Shown: 16 by 1 characters; Outline: 80.0 by 36.0 by 14.5
- VA: 64.5 x 14.5
- Supervisor: SPLC780D
- Persona: 3.20 x 6.35
- Driver: 1/16
Original JHD 16×2 Character LCD Display With Blue Backlight
- Model: JHD659 B/W
- 16 by 2 character display
- Sketch: 80.0 x 36.0 x 14.5
- Vector: 64.5 x 14.5
- Supervisor: SPLC780D
- Persona: 2.95 x 4.35
- Driver: 1/16
Original NEMA 23 Stepper Motor Vibration Damper Bracket 56*56*6 mm
- Made from mild steel.
- Strong and stable.
- Durable and robust..
- Specially designed for NEMA 23 stepper motors.
- Same diameters for motor mounting and bracket mounting.
Original Prusa CW1S Curing and Washing Machine
- Voltage range for input: 100 to 240
- Voltage output: 24 V
- 130 W of power are used.
- UV LED maximum power: 52,8 W
Original Prusa Einsy RAMBo (MK3S/+)
- Atmega 2560 is the main MCU.
- The innovative Einsy RAMBo 3D printer board
- 4-PWM Mosfet Output
- Voltages of the power supply: 10–24 V DC.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
OV5647 5MP 1080P IR-Cut Camera for Raspberry Pi 3/4 with Automatic Day Night Mode
- Raspberry Pi Camera, supports all revisions of the Pi
- Embedded IR-CUT filter, eliminating colour distortion due to IR light in the daylight
- Comes with infrared LED, supports night vision
- 5-megapixel OV5647 sensor
- Can Attach IR LEDs if Night Vision mode is required
- The screw hole on the camera is used to both fix the infrared lights and through the power for the lights.
OV7670 640×480 VGA CMOS Camera Image Sensor Module
- Operating Power: 60mW/15fpsVGAYUV.
- Sleeping Mode: <20 uA.
- Lens Size: 1/6″.
- Max. Frame Rate: 30fps VGA.
- Sensitivity: 1.3V / (Lux-sec).
- dynamic range: 52 dB.
- Electronic Exposure: 1 to 510 row.
Load more products
Loading...