Showing 1609–1620 of 2404 results
Shop
Orange 9V 2A Power Adapter with 5.5 X 2.5mm DC Plug
- Suitable for DIY & Hobby Kits, Routers, and Home Appliances.
- Rated Input AC Voltage 100v-240v
- It comes with a 1 meter long 24 AWG cable
- Stabilized DC Output with Low Ripples & Interference
- Short Circuit & Overload Protection
- High Efficiency & Low Energy Consumption
- RoHS and BIS compliance Approved.
Orange 9V 5A Power Adapter with 5.5 X 2.5mm DC Plug
- Suitable for DIY & Hobby Kits, Home Decorations, Medical, and Military Appliances.
- Rated Input AC Voltage 100v-240v
- It comes with a 1 meter long 18 AWG cable
- Stabilized DC Output with Low Ripples & Interference
- Short Circuit & Overload Protection
- High Efficiency & Low Energy Consumption
- RoHS and BIS compliance Approved.
Orange TT555 12V 30RPM Rectangular gearbox DC motor for DIY Project Encoder Compatible
- Rated current (mA): ≤2000.
- Rated power (W): 5.624.
- Rated Torque (N-m): 1.983
- Rated speed: 27 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 4500.
- Back shaft for Encoder Available
Original Arduino Due Board A000062
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
- 512KBytes of flash memory for code
- A DMA controller, that can relieve the CPU from doing memory intensive tasks.
Original Arduino Mega 2560 ATmega2560 MCU Rev3 A000067
- Manufacturer: Arduino Official
- Official Arduino Board with 3-Month brand Warranty
- ATmega16U2 instead 8U2 as USB to serial converter
- Stronger RESET circuit
- 5V operating voltage
- 40mA DC current per I/O pin
- 256KB flash memory of which 8KB used by bootloader
- 8KB SRAM
- 4KB EEPROM
Original Arduino Nano 33 BLE Sense Rev2 ABX00069
- Processor: nRF52840 (datasheet)
- Microcontroller: nRF52840
- Security: ECC608 crypto chip
- Flash: 1MB
- RAM: 256KB
- Circuit voltage 3.3V
- Sensors onboard: digital microphone, 6-axis accelerometer, pressure humidity, temperature, gesture recognition.
Original Arduino Nano A000005
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Original Arduino Nano Every ABX00028
- Manufacturer: Arduino
-
MCU: ATMega4809
-
Clock Speed: 20MHz
-
Flash: 48KB
-
EEPROM: 256byte
-
SRAM: 6KB
Original Arduino Uno Rev3 SMD A000073
- 14 digital inputs/outputs, including 6 PWM inputs
- 6 analog inputs
- 1 ICSP connector
- 1 revised and corrected reset circuit
Original JHD 16×1 Character LCD Display With Yellow Backlight
- Model: JHD651 Y/YG
- Shown: 16 by 1 characters; Outline: 80.0 by 36.0 by 14.5
- VA: 64.5 x 14.5
- Supervisor: SPLC780D
- Persona: 3.20 x 6.35
- Driver: 1/16
Original JHD 16×2 Character LCD Display With Blue Backlight
- Model: JHD659 B/W
- 16 by 2 character display
- Sketch: 80.0 x 36.0 x 14.5
- Vector: 64.5 x 14.5
- Supervisor: SPLC780D
- Persona: 2.95 x 4.35
- Driver: 1/16
Original NEMA 23 Stepper Motor Vibration Damper Bracket 56*56*6 mm
- Made from mild steel.
- Strong and stable.
- Durable and robust..
- Specially designed for NEMA 23 stepper motors.
- Same diameters for motor mounting and bracket mounting.
Load more products
Loading...