Showing 1621–1632 of 2404 results
Shop
Original Prusa CW1S Curing and Washing Machine
- Voltage range for input: 100 to 240
- Voltage output: 24 V
- 130 W of power are used.
- UV LED maximum power: 52,8 W
Original Prusa Einsy RAMBo (MK3S/+)
- Atmega 2560 is the main MCU.
- The innovative Einsy RAMBo 3D printer board
- 4-PWM Mosfet Output
- Voltages of the power supply: 10–24 V DC.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
OV5647 5MP 1080P IR-Cut Camera for Raspberry Pi 3/4 with Automatic Day Night Mode
- Raspberry Pi Camera, supports all revisions of the Pi
- Embedded IR-CUT filter, eliminating colour distortion due to IR light in the daylight
- Comes with infrared LED, supports night vision
- 5-megapixel OV5647 sensor
- Can Attach IR LEDs if Night Vision mode is required
- The screw hole on the camera is used to both fix the infrared lights and through the power for the lights.
OV7670 640×480 VGA CMOS Camera Image Sensor Module
- Operating Power: 60mW/15fpsVGAYUV.
- Sleeping Mode: <20 uA.
- Lens Size: 1/6″.
- Max. Frame Rate: 30fps VGA.
- Sensitivity: 1.3V / (Lux-sec).
- dynamic range: 52 dB.
- Electronic Exposure: 1 to 510 row.
OV7670 VGA CMOS Camera Image Sensor Module
- Operating Power: 60mW/15fpsVGAYUV.
- Sleeping Mode: <20 uA.
- Lens Size: 1/6
- Max. Frame Rate: 30fps VGA.
- Sensitivity: 1.3V / (Lux-sec).
- dynamic range: 52 dB.
- Electronic Exposure: 1 to 510 row.
P31 Water Level Sensor Plastic Float Switch
- Contact Rating: 10 W.
- Switching Voltage: 220 V.
- Switching Current: 0.5 A.
- Breakdown Voltage: 220 VDC.
- Carry Current: 1 A.
- Contact Resistance: 100 mΩ.
P35 Water Level Sensor Plastic Float Switch
Features:
- Long-lasting life
- Easy to use
P45 Water Level Sensor Plastic Float Switch
Features:
- Long-lasting life
- Easy to use
Pagoda 2 Antenna 5.8GHz with cover
Connector: RHCP Polarisation RP-SMA Male Plug Connector
Centre frequency: 5.8 GHz
500 MHz (5.55 – 6.05 GHz) of bandwidth
Circularly polarised omnidirectional antenna
Compact and lightweight
PAM 8610 Digital Stereo Class-D Amplifier Board 2x15W Output
- Dual-Channel Stereo Output with Run-On Power Supply (7V to 15V)
- 32 Action Steps The range of the DC volume control is +32dB to -75dB.
- package with 40 pin QFN, 6 x 6 mm.
- Much greater cost and performance efficiency than rival ICs
PAM8403 5V 2-Channel Stereo Audio Amplifier Module
- Dual channel stereo output 3 w + 3 w power Class D
- Works with 2.5V-5v power supply
- High amplification efficiency 85%
- can directly drive 4 O/8 O small speakers
- Good sound quality & noise suppression
- Unique without LC filter class D digital power board
- Can use computer USB power supply directly
- Small Size, 1.85 x 2.11 cm can easily fit in a variety of products
PAM8403 Mini 5V Digital Amplifier Board With Switch potentiometer
Features :
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage.
Load more products
Loading...