Showing 1645–1656 of 4073 results
ESP8266 10A DC 7-30V Network Relay WIFI Module
Original price was: ₹430.00.₹360.00Current price is: ₹360.00.- ESP8266 WiFi module with four layers of PCB design.
- With input with TVS and overvoltage protection, automatic protection kicks in when the voltage surpasses 33V.
- protection against input overcurrent.
- One ordinarily open and one normally closed 220V 10A relay.
- One-way optocoupler isolation input with protection for TVS input.
ESP8266 Adapter Plate Serial Wireless WIFI Module
Original price was: ₹55.00.₹45.00Current price is: ₹45.00.- It features reserved land-pattern for the 3.3V regulator
- It has Pinouts on the top layer in black colour.
- Compatible with Latest ESP-12F ESP8266 Wifi Module
- It includes a 10K pull-up resistor populated on PCB.
ESP8266 ESP-01 12V 4, Channels WiFi Relay, Module Things Smart, Home Remote Control, Switch
Original price was: ₹970.00.₹899.00Current price is: ₹899.00.- Distance of Transmission (m): 400
- Four relay channels and twelve VDC trigger voltage
- 250@10A is the switching voltage (VAC)
- Voltage difference (VDC): 30@10A
- Baud Rate: 9600
ESP8266 NodeMCU CP2102 Board
Original price was: ₹450.00.₹385.00Current price is: ₹385.00.- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
ESP8266 Web Server Serial WiFi Extension Board Shield ESP-13
Original price was: ₹880.00.₹532.00Current price is: ₹532.00.
- WiFi protocol: 802.11 b/g/n
- Work mode for STA/AP
- unified TCP/IP stack: one socket is supported
- Operate in client or server mode for TCP/UDP
- bps = 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps for serial ports
ESP8266 WiFi 5V 1 Channel Relay Module
Original price was: ₹490.00.₹385.00Current price is: ₹385.00.
- Onboard Module: ESP8266 wifi module, capable of connecting to five clients simultaneously in AP mode
- Operating Method: utilise the APP to control the relay when carrying a mobile connected to a wifi module and both connected to the same router.
- Maximum Transmission Distance: 400 metres
- 5V, 10A/250V AC, 10A/30V DC relay
- 9600 is the Baud rate.
- Protection against diode effusion; quick reaction time
ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
Original price was: ₹600.00.₹471.00Current price is: ₹471.00.- LDR Light Sensor on board
- WS2812 Led on board
- Includes CH340G USB-to-UART programmer
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
- Supports 3 modes: AP,STA,AP+STA
- Dimensions: 24mm x 16mm
- Micro USB connection for power and/or programming
Espressif ESP32-WROOM-32E 4M 32Mbit Flash WiFi Bluetooth Module
Original price was: ₹391.00.₹291.00Current price is: ₹291.00.- ESP32-D0WD-V3 embedded, Xtensa dual-core
- 32-bit LX6 microprocessor, up to 240 MHz
- 448 KB ROM for booting and core functions
- 520 KB SRAM for data and instructions
- 16 KB SRAM in RTC
- Wi-Fi: 802.11b/g/n
- Bit rate: 802.11n up to 150 Mbps
eSun 1.75mm 3D Printing PLA Filament 1Kg-Clear
Original price was: ₹1,589.00.₹1,370.00Current price is: ₹1,370.00.- Composition: PLA Filament
- Measurement in diameter: 1.75 mm
- Name of Brand: eSUN
- One kilogramme net weight
- At Break (%): 8 Elongation Flexural Modulus (MPa): 3600
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
eSun 1.75mm eSilk 3D Printing PLA Filament Gold
Original price was: ₹1,650.00.₹1,499.00Current price is: ₹1,499.00.- Composition: PLA
- Gold in colour
- Measurement in diameter: 1.75 mm
- Density (1.24 g/cm3), Print Temperature (210–220°C)
- Bed temperature: 30 °C without heat
- One kilogramme net weight
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Natural
Original price was: ₹1,400.00.₹1,160.00Current price is: ₹1,160.00.- More resilient and powerful
- Reduced warping (about 0.4% as opposed to more than 8% in ordinary ABS)
- Prints items that are more fluid and smoother.
- Improved resistance to heat, grease, and scratches
- Is polishable with acetone
- Easily coloured.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
eSun eBOX Lite 3D Printing Filament Storage Box for Keeping Filament Dry
Original price was: ₹6,800.00.₹5,270.00Current price is: ₹5,270.00.- Product Dimensions:215(L)×104(W)×238.5(H) mm.
- Composition: Acrylic
- Output Power: DC12V-3A
- Rated Power: 50/60Hz AC100-240V
- Drying Heater Power: 36W; Maximum Temperature: 80°C
- Maximum Holding: Φ200×73(H) mm.
- Weight: 925 grammes
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
