Showing 1645–1656 of 2404 results
Shop
PC4-M6 Pneumatic Push in Bowden Extruder for 3mm J-Head fitting
- Diameter inside: 4 mm
- Thread Size: M6 PTFE Tubing Compatibility: 1.75mm Filament with 3mm ID PTFE Tubing
- Materials: Brass with a nickel plating
- Release Technique: Ellipse Fitting John Guest
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
PC817 DIP-4 Transistor Output Optocoupler (Pack of 5 ICs)
- Collector current: 10–20 mA.
- Forward current of 50 mA.
- 6V is the reverse voltage.
- Total power dissipation of 200mW.
- Applications: Industrial, Communications & Networking.
PCF8563 RTC Board For Raspberry Pi Real Time Clock Module-Blue
- Model: PCF8563
- Weight : 3 gm.
- I2C pin header,
- 3.3V battery.
- Dimensions : 61 x 16 x 11 mm (LxWxH).
PCF8575 Remote 16 Bits I2C IIC SMBus I/O Expander Module
- Kind of Item: PCF8575
- 2.5–5.5 VDC is the operating voltage.
- Maximum operating current: 100 mA
- I2C address: 0x20 by default; soldering A1 and selection pads A2 will modify it.
PCF8591 Module Analog to Digital / Digital-Analog Converter Module
- The module supports external voltage input of the 4-way acquisition (voltage input range of 0-5v)
- The module integrated photoresistor by AD collection precise value of the ambient light intensity
- Module integrated thermistor by the precise value of the ambient temperature of the AD acquisition
- Module integrated 1 channel 0-5V voltage input acquisition (the blue potentiometer to adjust the input voltage)
- Modules with power indicator (for the module power supply indicator lights)
- Modules with DA output indicator, when the module DA output interface voltage reaches a certain value, will be lit panel the DA output indicator, the higher the voltage, the more obvious indicator brightness
- Module PCB size: 3.6cm x 2.3cm
- A standard double panel, thickness 1.6mm, nice layout, surrounded by a through-hole, aperture: 3mm, convenient fixed.
PCF8591 Module Analog to Digital / Digital-Analog Converter Module
- Single power supply
- A PCF8591 operating voltage range of 2.5V-6V
- Low standby current
- Via I2C bus serial input/output
- PCF8591 by 3 hardware address pins addressing
- PCF8591 I2C bus speed sampling rate decided
- 4 analog inputs programmable single-ended or differential input
- Automatic incremental channel selection
- PCF8591 analog voltage range from VSS to VDD
- PCF8591 built-in track-and-hold circuit
- 8-bit successive approximation A / D converter
- 1 analog output DAC gain
PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire
- PCF8951-based module chip
- The module may accept an external voltage input with a 4-way acquisition range of 0 to 5 volts.
- The exact value of the ambient light intensity is collected by the module’s inbuilt photoresistor using AD collection.
- Thermostat embedded within the module based on the exact measurement of the AD acquisition’s ambient temperature
- One channel of 0–5V voltage input acquisition is built into the module (the input voltage is adjusted by the blue potentiometer).
- Power-indicating modules (for the power supply indicator lights on the modules)
- Modules featuring a DA output indicator will illuminate when the module’s DA output interface voltage reaches a predetermined level; the higher the voltage, the more conspicuous the indicator brightness.
PCT-213 0.08-2.5mm 3 Pole Wire Connector Terminal Block with Spring Lock Lever for Cable Connection
Make: PCT-213
220V is the rated voltage.
Rated Voltage for Impulse: 4KV
Insulation Material: PA66, or modified nylon
Colour: Orange and Grey
Rated Power: 32 Amperes
7KW of rated power
Measurement: 28–12 AWG
PCT-215 0.08-2.5mm 5 Pole Wire Connector Terminal Block with Spring Lock Lever for Cable Connection
- Make: PCT-215
- 220V is the rated voltage.
- Rated Voltage for Impulse: 4KV
- Insulation Material: PA66, or modified nylon
- Colour: Orange and Grey
- Rated Power: 32 Amperes
- 7KW of rated power
- Measurement: 28–12 AWG
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
PCT-218 0.08-2.5mm 8 Pole Wire Connector Terminal Block with Spring Lock Lever for Cable Connection
- Make: PCT-214
- 220V is the rated voltage.
- Rated Voltage for Impulse: 4KV
- Insulation Material: PA66, or modified nylon
- Colour: Orange and Grey
- Rated Power: 32 Amperes
- 7KW of rated power
- Measurement: 28–12 AWG
PCT-223-12 Stationary Type, Quick Connection Terminal
- The PCT-223-12 model
- Rank 600 volts at voltage
- Assessed Impulse 4KV of voltage
- Insulation Material: PA66, or modified nylon
- Colour: Orange and Grey
- Rated Power: 32 Amperes
- Measurement: 28–12 AWG
PCT-225D Guide Rail Type, Quick Connection Terminal
- Voltage rating: 400V
- 32A is the rated current.
- There are five poles.
- DIN rail wire section recording: 0.5–4 mm2
Load more products
Loading...