Showing 1657–1668 of 2404 results
Shop
PCT-SPL-62 0.08-2.5mm 6:2 Pole Wire Connector Terminal Block with Spring Lock Lever for Cable Connection
- Superior Insulating Nylon Construction
- Robust Spring Locking Mechanism
- Nickel-plated Metal Point Internally
- Compact Splicing Connector with Good Temperature Resistance and a 6:2 Conductor Terminal Block
PDB-XT60 with BEC 5V and 12V
- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- Regulated 5V and 12V outputs
- Short circuit tolerantInput voltage range: 9 – 18V DC (3S-4S LiPoly operation)
- Output continuous current: 25Ax4 or 15Ax6
- Output Peak current (10 seconds/minute): 30Ax4 or 20Ax6
- Short-circuit tolerant: 5 seconds/minute
PDB-XT60 with BEC 5V and 12V
- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- Regulated 5V and 12V outputs
- Short circuit tolerantInput voltage range: 9 – 18V DC (3S-4S LiPoly operation)
- Output continuous current: 25Ax4 or 15Ax6
- Output Peak current (10 seconds/minute): 30Ax4 or 20Ax6
- Short-circuit tolerant: 5 seconds/minute
PDB12-H4151-104BF – BOURNS
- Name: PDB12-H4151-104BF
- Case/Package: POT
Peacefair PZEM-004T AC Multi-function Electric Energy Metering Power Monitor
- Trademark: Peacefair
- Make: PZEM-004T
- 80-260 VAC is the operating voltage.
- Voltage to Test: 80-260 VAC
- Rated Amperage: 100A
- Rated power: 22000W at 100A.
- frequency of operation: 45–65 Hz
- Measurement precision: 1.0
PG -11 WIRE WATERPROOFING LAND CONNECTOR
- Model: PG9
- Material: Heavy duty nylon Plastic
- Color: White
- Degree protection: IP67 (waterproof)
- Cable range: 4-8mm
- Thread outer diameter: approx. 15mm
- Thread length: Approximately. 9mm
- Total size: about. 24x32mm
PG-09 WIRE WATERPROOFING LAND CONNECTOR
The EV PG-09 wire waterproofing land connector is a waterproof connector designed for electric vehicles, specifically used to secure and protect wire connections from moisture and environmental factors.
PH Sensor Analog Kit for Arduino
Features:
- Heating voltage: 5 ± 0.2V (AC · DC)
- Working current: 5-10mA
- Detectable concentration range: PH0-14
- Detection Temperature range: 0-80 °
- Response time: ≤5S
- Settling Time: ≤60S
- Component Power: ≤0.5W
- Working temperature: -10 ~ 50 ° (nominal temperature 20 °)
- Humidity: 95% RH (nominal humidity 65% RH)
- Module Size: 42mm × 32mm × 20mm
- Output: analog voltage signal output
- With 4pcs M3 Mounting Holes
PH37A 8+8 Power Supply Adapter Board
- Type: 8+8Pin to 6+8Pin adapter
- Color: Black
- Model: PH37A
- Item size: 7.6 x 3.4 x 1.7cm
Photoelectric Speed Sensor Encoder Coded Disc code wheel
- Brand new and high quality.
- Small and Easy to use the module.
- It offers the fast response at a very good accuracy
- Two signal lines, one yellow, one blue.
- Yellow and blue are two TTL level signals
PIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 10 mm)
Assist with the most widely used PIC programming chips, read, encrypt, and more!
All you need for complete printing without any cables is a USB cable, which serves as both the communication and power sources.
Programming is far slower than PICSTARTPLUS.
Able to read the contents of the chip’s program section with ease.
Verification of programming automatically.
Users are prompted with thorough information so they can comprehend the state of operation.
PIC Microcontroller Development Board
Load more products
Loading...