Showing 1753–1764 of 2404 results
Radiolink R9DS receiver
Original price was: ₹2,832.00.₹1,947.00Current price is: ₹1,947.00. (Incl. GST)- Brand: RadioLink
- Model: R9DS
- Operating Voltage: 3.6-12V
- Operating Current: 38-45mA@5V.
- Frequency: 2.4GHz
Radiolink T8FB 2.4GHz 8 Channels RC Remote Transmitter with Receiver R8EF Dual Stick Controller
Original price was: ₹7,726.64.₹5,725.36Current price is: ₹5,725.36. (Incl. GST)- Operating voltage: 4.8V~18V
- Operating current: <80(±)mA
- Channels: 8 Channels
- ACPR: >36dBM
- Modulation Mode: GFSK
- Compatible with receivers: R8SM/R8FM/R8EF/R8F/R8FG/R7FG/R6FG/R6F/R4FGM
Radiolink T8S 2.4GHz 8CH Transmitter + R8EF Receiver with Built-in Rechargeable Battery and Bluetooth for App control
Original price was: ₹6,643.40.₹5,876.40Current price is: ₹5,876.40. (Incl. GST)- All New ergonomics design with the small size handy to use and travel.
- Three times faster than Open TX
- Built-in IS 900 mAh lithium battery
- Provides excellent anti-interference performance
- Super low battery consumption of 150 mA
- Unlimited models can be stored.
- Bluetooth connectivity for App control and use as a wireless emulator
Radiomaster Boxer Radio Controller – CC2500 Version
Original price was: ₹12,978.82.₹12,270.82Current price is: ₹12,270.82. (Incl. GST)- Display 128*64 Monochrome LCD display
- The voltage range is 6.6-8.4V DC
Radiomaster Zorro ELRS Radio Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
Original price was: ₹19,883.00.₹17,015.60Current price is: ₹17,015.60. (Incl. GST)- Charging: Built-in USB-C Charging
- Display: 128*64 Monochrome LCD
- Operational current: 160mA@8.4V
- Operational voltage: 6.6-8.4v DC
- Battery Slot: 2 x 18350 (Not included)
- Supported protocols: ELRS
- Physical dimensions: 170*159*108mm
- Weight: 355gm
RAMPS 1.4 3D PRINTER CONTROLLER+Mega2560 with Cable compatible with Arduino +5Pcs 4988 Driver With Heat Sink+LCD 128×64 Display Kit
Original price was: ₹4,130.00.₹3,835.00Current price is: ₹3,835.00. (Incl. GST)
RAMPS 1.4 3D Printer controller+Mega2560 with cable compatible with Arduino +5Pcs A4988 Driver with heat sink Kit
Original price was: ₹3,162.40.₹2,908.70Current price is: ₹2,908.70. (Incl. GST)- USB type B connector.
- Available as an SD Card add-on.
- Fits driver board for five Pololu steppers.
- When the heater is turned on, LEDs show it.
- Scalable to accommodate more accessories.
- Bed control with an extra 11A fuse for heating.
Raspberry Pi – Power supply, 48W, DC jack, EU plug, white
Original price was: ₹421.26.₹303.26Current price is: ₹303.26. (Incl. GST)Output voltage: 8 V DC
• rated load current: 6 A
• maximum power: 48 W
• short circuit protection
• overcurrent protection
• overvoltage protection
• efficiency: >88 %
• Output cable: 1.5 m (16AWG)
• Output connector: DC hollow plug (5.5×2.1×11 mm)
• Operating ambient temperature: 0 .. 40 °C
Raspberry Pi 15W Official Black Power Supply (EU)
Original price was: ₹885.00.₹867.30Current price is: ₹867.30. (Incl. GST)- 5.1V / 3.0A DC output
- 1.5m 18AWG captive cable with USB-C output connector
- It has low power consumption on stand by mode
- It is compatible with Raspberry Pi 4 devices.
- it protects the device from short circuits and overloading
Raspberry Pi 3 – Model B Original with Onboard WiFi and Bluetooth
Original price was: ₹4,543.00.₹4,364.82Current price is: ₹4,364.82. (Incl. GST)- RAM: 1GB
- Processor: Broadcom BCM2837 chipset 1.2GHz Quad-Core ARM Cortex-A53 (64Bit)
- 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
- Storage : SD/MMC/SDIO
- Power: 5V / 700mA~3A via micro USB
Raspberry Pi 3 Heat Sink set
Original price was: ₹188.80.₹152.22Current price is: ₹152.22. (Incl. GST)- Reduces the risk of hardware failure due to overheating
- Low profile, will fit into most cases.
- Simple, Passive cooling. No need for noisy fans.
- Perfectly sized for the RPi’s CPU
Raspberry Pi 3 in 1 Heat Sink Aluminium for Raspberry Pi 4B (Gold) – Pack of 1
Original price was: ₹129.80.₹105.02Current price is: ₹105.02. (Incl. GST)- The heat sinks have short profiles that are enough to fit within standard Raspberry Pi cases.
- The aluminum heatsinks work well to dissipate excess heat.
- Easy to apply, come with self-adhesive.
- Includes one large and two small heat sinks.Easy to apply heatsinks for a Raspberry Pi board
