Showing 1885–1896 of 4073 results
Shop
Flexible coupling OD:25mm x L:32mm Bore:10x10mm (ZRB-25×32)
- Aluminium is the material.
- Peak Velocity: 20,000 RPM
- Torque Rated: 1.5 N-m
- 10mm is the bore diameter (d1).
- 10mm is the bore diameter (d2).
Flexible coupling OD:25mm x L:32mm Bore:6x8mm (ZRB-25×32)
- Aluminium is the material.
- Peak Velocity: 20,000 RPM
- Torque Rated: 1.5 N-m
- Bore Diameter (d1): 6 mm.
- D2: Bore Diameter: 8 mm.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Flexible coupling OD:25mm x L:32mm Bore:8x8mm (ZRB-25×32)
- Aluminium is the material.
- Peak Velocity: 20,000 RPM
- Torque Rated: 1.5 N-m
- Bore Diameter (d1): 8 mm.
- D2: Bore Diameter: 8 mm.
FLEXIBLE TRANSPARENT HEATER
A flexible transparent heater or transparent heating film may be required if a product has a see-through surface. This means that the transparent thin film heater must not interfere and visibly block the surface. Transparent heaters are used to heat surfaces close to an object that requires heating and must remain visible as well.
FlexiForce A301-25 Force Sensor
- Thickness:0.203 mm
- Length:25.4 mm
- Standard Force: 111 N
- Width :14 mm
- Sensing Area diameter:9.53 mm FOR BULK B2B ENQUIRIES MAIL US @ibots.in
Flip32 OMNIBUS F4 Flight Controller
- 128Mb Flash(16M Byte)
- SBUS/PPM input (Pinheaders)
- DSM/DSM2/DSMX input(Plug)
- 6PWM output (Pinheaders)
- Only 36x36mm, mount holes 30.5×30.5mm
- All through hole pin header Design -no Sh connectors
- STM32 F405 MCU, Runs Raceflight CC3D REVO firmware
- Works Perfect with Raceflight or BetaFlight 3.0
FLORA – Wearable electronic platform: Arduino-compatible – v3
- FLORA is fabric-friendly and beginner-friendly.
- 4 indicator LEDs and an RGB NeoPixel for even more colorful lighting.
- Easily drive 50 pixels directly from the onboard power supply or up to 500 pixels with a 5V supply.
- Can power common 3.3v modules and sensors.
- Perfect for beginners.
Fluke 101 Digital Multimeter
Basic 0.5% DC accuracy
600 V CAT III safety rated
Continuity test and diode with buzzer
Tiny, light design that may be operated with one hand
robust, long-lasting design
FLY SKY FS IA6B RF 2.4GHz 6CH PPM output with iBus port receiver
- Model:FS-iA6B
- Operating Voltage (VDC):4.0 ~ 8.4V
- No. of Channels:6
- No. of Band:140
- Encoding: GFSK.
- RF Range:2.4055–2.475 GHz.
- Rx Sensitivity (dBm):-105
- Antenna Length (mm):26
- Video Format Supported:NTSC/PAL
FlySky CT6B 2.4GHz 6CH Transmitter with FS-R6B Receiver
- Model Type: Digital Radio Transceiver.
- Sensitivity: 1024.
- Bandwidth: 500 kHz.
- Default Operating Mode: Mode 2 (Left-Hand Throttle).
- No. of Channels: 6.
- Operating Voltage: 12V DC (1.5AA x 8 Battery).
FlySky Data Line Cable Access Wiring Connector for T6 i6, FS-i6, FS-T6 Transmitter
- Data Line Cable Access for FS-i6 FS-T6 T6 i6 Transmitter
- Length: 1.5m / 4-29/32 ft
- This wire cannot be used for a simulator.
FlySky FS-A8S 2.4G 8CH Mini Receiver Module Rev 2
- Channels: PPM 8CH, i-BUS 18CH.
- Frequency range: 2.408-2.475GHz.
- Bandwidth: 500KHz.
- Band number: 135.
- RX Sensitivity: -92 dBm.
- 2.4GHz system: AFHDS 2A.
- Modulation type: GFSK.
Load more products
Loading...