Showing 1933–1944 of 2373 results
SeeedStudio Grove Recorder v3.0
Original price was: ₹2,122.82.₹1,768.82Current price is: ₹1,768.82. (Incl. GST)- Working Voltage: 3.⅗V
- Working Current (@5V, 25℃)
- Standby: 25-30mA
- Recording: 29-35mA
- Playing: 110-150mA
- Working Current (@3.3V, 25℃)
- Standby: 23-25mA
- Recording: 25-30mA
- Playing: 70-150mA
- Working Temperature: 0~85℃
- Size: 40x20mm
- Weight: 31.5g
SeeedStudio Grove Speaker
Original price was: ₹1,003.00.₹867.30Current price is: ₹867.30. (Incl. GST)- DC operating voltage: 4 to 5.5 volts
- Maximum voltage gain: 46 dB
- 20 kHz is the bandwidth.
- The audio amplifier LM386
- Volume that can be changed
- Grove-compatible user interface
SeeedStudio Grove Water Atomization v1.0
Original price was: ₹1,652.00.₹1,285.02Current price is: ₹1,285.02. (Incl. GST)- Working voltage: DC 5.0 volts
- Ripple (max power): less than 100 mV
- Maximum power of 2W
- Maximum voltage output: 65±5V
- Heated using ultrasonography
- Simple to develop a prototype for
SeeedStudio GrovePi+
Original price was: ₹7,078.82.₹5,898.82Current price is: ₹5,898.82. (Incl. GST)- Working Voltage: 5V
- MCU: ATMEGA328P
- Dimensions 88mm x58mm x23mm
- Weight: 51g
- Raspberry Pi Connector Pins: 26
SEN-HZ21WI 1/2″ Brass Water Flow Sensor
Original price was: ₹472.00.₹442.50Current price is: ₹442.50. (Incl. GST)Specifications of SEN-HZ21WI Water flow Sensor
- Model : SEN-HZ21WI
- Water quality requirement : Drinking water health standards, 0～80℃
- Flow range : 1～ 30 Liter/min
- Withstand hydraulic pressure : ≤1.75 MPa
- Voltage/electric current : DC4.5～18V, ≤15mA
- Insulation resistance : >100MΩ
- Electrical strength : AC500V, 50HZ
- Output level : Rated voltage DC 5 Volt, high level ≥4.5 Volt, low level ≤ 0.5 Volt
- Pulse duty cycle : 50%
- Flow characteristic : F=10 Q-4, F:HZ, Q:L/min，±10%
- Cumulative flow conversion : 1 Liter water = 553 pulses , accuracy: 10%
SEN-HZ21WI 1/2″ Brass Water Flow Sensor
Original price was: ₹706.82.₹541.62Current price is: ₹541.62. (Incl. GST)Note:-
- When magnetic material is close with the sensor, its characteristics may vary.
- In order to avoid particle debris, the sensor must be installed after a filter.
- The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor’s measurement accuracy.
Sensor Shield V5 Expansion Board For Arduino
Original price was: ₹234.82.₹152.22Current price is: ₹152.22. (Incl. GST)- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
Serial UART TTL to Ethernet Converter Module – USR-TCP232-T2
Original price was: ₹1,475.00.₹1,239.00Current price is: ₹1,239.00. (Incl. GST)- Ethernet: RJ45 connector x 1
- COM port: TTL x 1
- Protection: built-in 2KV electromagnetic isolation
- Pinheader: 2.54mm pitch
- Power supply: 3.3V DC or 5V DC
- Dimension (L×W×H mm): 33×16.8×13.6
- Operating temperature: industrial -25~75°C
Set of 4 A2212 1000 KV BLDC Brushless DC Motor with SimonK 30A ESC and Orange 1045 Propeller Set
Original price was: ₹4,718.82.₹4,456.86Current price is: ₹4,456.86. (Incl. GST)- Offers great performance and value for money.
- Suitable for airplane, aircraft, quadcopter.
- Motor KV: 1000
- LiPO Batteries: 2S-3S
- Shaft Diameter: 3.17 mm
- ESC used has an On-Board BEC.
- Propeller: Orange HD 1045
Set of 4 A2212 1400KV Brushless Motor for Drone with SimonK 30A ESC and Orange 1045 Propeller Set
Original price was: ₹5,898.82.₹4,455.68Current price is: ₹4,455.68. (Incl. GST)- Offers great performance and value for money.
- Comes in the compact sizes.
- Suitable for airplane, aircraft, quadcopter.
- ESC used has an On-Board BEC.
- Faster and Better speed control.
Set of Blue Aluminum Heatsink for Raspberry Pi
Original price was: ₹53.10.₹34.22Current price is: ₹34.22. (Incl. GST)- Dimensions
- Large Heatsink: 14 x 14 x 6 (LxWxH) mm
- Small Heatsink: 9 x 9 x 5 (LxWxH) mm
- Teeth Number
- Large Heatsink: 4 rows and 7 columns
- Small Heatsink: 5 Teeth
- Compatible with most Raspberry Pi cases
- Suitable for Auxiliary heat for Raspberry pi 2 model B/Raspberry Pi B+.
- Raspberry Pi B development boards and other electronic chips
SG-002 Analog 0-12V 0-24mA Signal Generator for PLC and Panel Debugging & Device Testing
Original price was: ₹2,301.00.₹2,017.80Current price is: ₹2,017.80. (Incl. GST)- Micro USB external power supply, 5V.
- Output Voltage: 0–12V.
- Output Current: 0–22 mA.
- Multiple Display: To change the display mode, simply press the tiny button.
- Product measurements: 38 x 70 x 100 mm
